Skip to main content
← PURSUE Release 8

DOW-UAP-D172, BAASS Ten-Month Report, July 2009

BAASS ten-month contractor report to DIA (July 2009)

Department of WarPDFAnalysisLight redactionPURSUE Release 8

Part of cases: Loring AFB UAP sightings, Maine · Colares UFO sightings, Colares Island, Brazil · Washington, D.C. radar sightings, July 1952

6/10

solid newsworthy item

UAP Insight significance score

Location
Las Vegas, Nevada
Incident date
7/30/09
Witnesses
Human + sensor
Released
November 20, 2026

UAP Characteristics

? Unknown shapeHoveringHypersonic speedInstant accelerationErratic movementLuminousSilent flightWater submersionObject splittingSize change

Evidence Types

TestimonyRadarIR VideoPhotosPhysicalVisualMulti-sensor

Government Programs Referenced

What the record concludes

Not a single incident reportBAASS ten-month programmatic report to DIA covering many cases and projects, a compilation with no single conclusion; it states no overall conclusion.

AI-assisted reading of the record, not our opinion. What all the files conclude →

Official Conclusion

No overall conclusion. Individual cases are mostly unresolved or attributed to prosaic causes, and the Northern Tier, Colares and Canadian projects are stated to be ongoing with 'no true conclusions' yet.

Official Description

This document is an administrative, programmatic, or contractor-produced record related to the Advanced Aerospace Weapon System Applications Program (AAWSAP), a Defense Intelligence Agency (DIA)-administered program active from 2008 to 2012. AAWSAP’s official scope of work identified 12 technical research areas relating to potential aerospace threats over a time horizon of more than 40 years. As part of the broader program record, the file documents how AAWSAP was scoped, organized, tasked, funded, executed, or described at a particular point in time. This file contains a program report produced by Bigelow Aerospace Advanced Space Studies (BAASS), summarizing its work under the AAWSAP contract through July 30, 2009, while also including substantial forward-looking discussion of planned or proposed work. It includes unresolved internal process questions and comparative assessments of equipment options. In addition to documenting the production of a series of technical research papers, the report describes archival and documentary research concerning historical incidents reported to involve unidentified anomalous phenomena. The report also documents BAASS inquiries into parapsychological and paranormal phenomena, including research activities at a Utah site with a reported history of anomalous activity.

Key Findings

  • →BAASS, a DIA-sponsored contractor with a TS facility clearance and about 47 employees, describes its mission as researching 12 advanced aerospace technology areas and 'exploiting' technology discovered through UAP investigation.
  • →The report summarizes BAASS field cases: most were prosaic or unresolved (Oregon, Trout Lake, Lake Havasu, Liberty County rocket), while the Marathon, TX daylight CE3 case was reported to remain unexplained with two witnesses deemed reliable and fingernail samples collected for EPR dosimetry.
  • →It includes secondhand pilot accounts of the 2004 Nimitz 'Tic Tac' event (recollection of the VFA-232 CO, radar, ATFLIR track, jamming indications) and the 2007 RAF Lakenheath F-15C incident, in which the lead pilot now believes the object was likely a weather balloon.
  • →The CAPELLA data warehouse holds about 237,000 UAP records from nine databases, and BAASS analyzed released UAP files from Canada, Denmark, France (GEIPAN), the UK MoD and Brazil, including the Calvine, Scotland 1990 diamond-shaped object photos and the Trans-en-Provence 1981 trace case.
  • →Project Engagement/Utah ranch and the 2010 plan describe paranormal and consciousness-related phenomena (cold zones, shadow figures, differing perceived shapes through night vision). BAASS also proposes remote viewing, psychics and an acquisition effort for recovered hardware and biological material; one Utah light was attributed to a probable human night-vision observer.
UAP Insight Analysis— AI generated, not official

This is a BAASS (Bigelow Aerospace Advanced Space Studies) ten-month contractor report to DIA under the AAWSAP contract (HHM402-08-C-0072), dated July 30, 2009. It covers organizational and infrastructure setup, field investigation deployments, the CAPELLA UAP data warehouse, foreign government file releases, Project Northern Tier, Project Colares/Brazil, remote viewing, Utah ranch paranormal work, South American outreach and a 2010 strategic plan. Most incident content is secondhand, historical or investigator-reported, and the report is largely programmatic.

Analyst Notes

Analysis is based on a transcript, not the scanned images. This is a contractor self-report that mixes programmatic detail with largely secondhand, historical or recollected accounts and few primary sensor data; BAASS investigations often found prosaic explanations (satellites, aircraft, balloon, rocket, stars) or unreliable witnesses. The Utah ranch and remote viewing sections rely on anecdote, perceptual variability and hallucinogen-affected witnesses, and the report is advocacy-leaning, assuming non-human craft exist (e.g., Project Forum). Lakenheath was believed by its lead pilot to be a weather balloon, and the Tic Tac account relies on recollection. Names are redacted and key claims (hardware, biological samples) are unverified.

In this file

PDF not loading? Open directly ↗

Open PDF in new tab ↗

AI analysis by claude-sonnet-5-5 · November 20, 2026

Cite this document

Department of War. "DOW-UAP-D172, BAASS Ten-Month Report, July 2009." PURSUE Release 8, released 2026-11-20, war.gov/UFO. https://war.gov/medialink/ufo/docs-112026-release-08/DOW-UAP-D172-BAASS_Ten_Month_Report_July-2009.pdf. Transcript and analysis: UAP Insight, https://uapinsight.com/gov/doc/99b81b893bcf223c.

Full transcript · 538 pages

Machine transcription by Claude Haiku 5.5 — it may contain errors; check the original. Redacted text stays redacted.

Show the transcript
Page 1 ↗

Blank or picture-only page.

Page 2 ↗
BAASS Ten Month Report
July 30, 2009
Page 3 ↗

Blank or picture-only page.

Page 4 ↗
Table of Contents
Section 1: Creation of BAASS Organization and Infrastructure.................................................................................Page 1
Section 2: Project/Research Summary.......................................................Page S0
2A BAASS Investigations.......................................................................... Page 50
2B BAASS Contract Awarded.................................................................Page 109
2C Progress on Nine Committed BAASS Projects.............................. Page 111
Project Physics.........................................................................Page 114
Project Engagement....................................................................Page 158
Project Cooperation....................................................................Page 185
Project Blue Book Materials.......................................................Page 190
Project Campus..........................................................................Page 203
Project Oral History....................................................................Page 214
Project Database/ Analysis Government Files..........................Page217
Project Northern Tier.................................................................Page 308
Project Colares/Brazil.................................................................Page 391
Progress on BAASS Outreach to South America.....................Page 453
Section 3: Strategic Plan for 2010...........................................................Page 472
Appendix 1.....................................................BAASS Org Chart
Appendix 2.....................................................BAASS Investigative SOP
Appendix 3.....................................................Capella Users Guide
Appendix 4.....................................................South American Org Chart
Page 5 ↗

Blank or picture-only page.

Page 6 ↗

Blank or picture-only page.

Page 7 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

SECTION 1: CREATION OF BAASS ORGANIZATION AND INFRASTRUCTURE

(1) Creation of BAASS Organization and Infrastructure September 22, 2008- July 31, 2009.

BAASS received notification that contract # HHM402-08-C-0072 was awarded on September 22, 2008. The contract stipulated that BAASS would acquire buildings and ensure that they conformed to regulations concerning the Top Secret security clearances needed to operate AND that the necessary qualified personnel would be hired that would be capable of researching advanced aerospace technology under the rubric of the following 12 designated areas: (1) Lift, (2) Propulsion, (3) control, (4) Power Generation, (5) Spatial/Temporal Translation, (6) Materials, (7) Configuration/Structure, (8) Signature Reduction (Optical/IR/RF/Acoustic), (9)Human Interface, (10) Human effects, (11) Armament (RF and DEW), and (12) Other areas in support of 1-11.

1843(a)(2) the BAASS administrator summarized the initial problems associated with correctly choosing the first BAASS facility in the October 2008 monthly report: "I personally spent considerable time checking out numerous possible locations for BAASS, keeping in mind that, certain criteria needed to be met. In addition to this criteria, there were issues of physical modifications that were necessary for all locations. Issues including: who would pay for these changes; the reluctance of landlords to agree (sometimes we could not locate a spokesperson responsible for the landlord) to these modifications; and the glacial pace that this entire remodeling process would take. All choices required some remodeling and the landlords were not very accommodating. Finally, I chose one of my own buildings. BAASS would not have a landlord standing over it, dictating every remodeling move or preventing some important change. Also, very
Page 8 ↗
important, was eliminating the possibility of any landlord (surprise) inspections, as well as, having absolute control over who else might the landlord rent to in any adjoining offices with a preference for none."

The new BAASS facility was located at 4975, South Polaris Avenue, Las Vegas 89118 and was judged to be in a location that was secure. The BAASS building was located in the middle of a complex of buildings owned and operated by other Bigelow companies, hence counter intelligence measures could easily be implemented in the area surrounding the BAASS building without alerting landlords or adjacent buildings. 1843(a)(2)

During this period, BAASS had no employees save the administrator, [REDACTED] and senior analyst [REDACTED]. (In September 2008, a BAASS administrator was hired, but shortly thereafter resigned). [REDACTED] summarized the extensive renovations that were carried out to the BAASS building at 4975 South Polaris Avenue in order to bring it to the standards required to operate under the new contract: "From the end of September to the beginning of November, we added about fourteen offices; all of them have been soundproofed and have electronic locks and deadbolts. All windows in the building were tinted and the building and parking lot were surrounded with an eightfoot tall fence. All building names and logos were removed. Alarm systems and cameras are being installed. An Information Technology Management room was constructed and considerable office equipment is being provided in addition to, new computers. Also, furniture throughout was purchased and installed. The building address and phone numbers will not be listed in the city phone directory."

On November 10, 2008, [REDACTED] the BAASS deputy administrator, began work and over the subsequent eight months approximately 47 full time BAASS employees were hired (see Table 1 and Appendix 1; employee list and org chart, respectively). As the number of employees grew, it quickly became apparent that new facilities for the second year of operations were needed.
Page 9 ↗
Progress on New BAASS Facilities: May-July 2009

During the month of May 2009 [REDACTED] the BAASS administrator, made substantial progress on two major real estate projects in line with anticipated future BAASS needs (see below).

(1) Underground Vault: The need for a highly secure underground vault operated by BAASS became apparent in line with a BAASS priority to pursue and acquire recovered hardware and biological samples from the corporate world and/or from private individuals and groups located elsewhere, including Brazil. It was recognized by the BAASS administrator that there was no highly secure facility at BAASS to store exotic material or tissue that the organization could obtain. Accordingly, the BAASS administrator designed an underground facility to be located in North Las Vegas at the Bigelow Aerospace facility. The chosen location is exceptionally well protected by perimeter fencing and razor wire, surveillance cameras and 24 hour armed guards who are retired or current military. Further, the BAASS administrator during the month of May designed and created architectural plans for a 5000 sq.ft underground vault with 3 foot thick walls, ceiling and floor with a concrete access tunnel leading to multiple security doors, at least one of which comprises a thick vault steel door. The entire facility will be located underground at the Bigelow Aerospace facility with over 15-20 feet of earth above the structure. Any surface structures protruding from the ground will be extensively camouflaged. It is anticipated that subject to building permits, the new underground facility will be capable of being occupied by late 2009 or early 2010. More details on this project will be reported in the August 2009 BAASS monthly report.

(2) New Buildings Purchased for BAASS: Because of the extremely rapid pace of BAASS personnel expansion (see previous section), the
Page 10 ↗
organization is close to outgrowing the current BAASS facility. Accordingly, the BAASS administrator began planning for this eventuality late last year (2008) and in the past several months has personally visited and inspected close to fifty separate buildings for sale located in different areas of the Las Vegas Valley with a view to purchasing a new facility for the rapidly expanding organization. This lengthy, time consuming process culminated in the purchase of five new office buildings which will be customized for BAASS personnel use. As of May 31, 2009 these five buildings are now in escrow. It is intended that the buildings will include a 5000 sq ft laboratory and secure physical evidence storage facility and a second building will contain a secure conference room (SCIF) and adjacent office space for multiple personnel. The architectural designs for each of the five buildings have gone through multiple iterations and as of July 2009 are complete. These new buildings should be capable of being occupied by BAASS personnel by the end of 2009.

(2) PROGRESS ON HIRING BAASS PERSONNEL

A lengthy process beginning in September 2008 covering ten months, involving advertising in multiple simultaneous Internet outlets has resulted in BAASS reviewing an average of 500 resumes per month which in turn, has resulted in over 300 telephone and face-to-face interviews. This has resulted in the hiring of a dynamic team of 47 BAASS full time employees, including scientists, engineers, investigators (military AND law enforcement backgrounds), analysts, translators, researchers and security guards.
Page 11 ↗
Table I: BAASS Employees
1843(a)(2) Administrator
1843(a)(2) Deputy Administrator
[REDACTED] Fulltime BAASS Employees Significant Part-time BAASS Employees
[REDACTED] Senior Analyst level V
[REDACTED] Lead Program Manager
[REDACTED] Lead Program Manager
[REDACTED] Senior Project Manager
[REDACTED] Senior Project Manager
[REDACTED] Senior Project Manager
[REDACTED] Mission Analyst
[REDACTED] Mission Analyst
[REDACTED] Mission Analyst
[REDACTED] Mission Analyst
[REDACTED] Lead Scientist level V
[REDACTED] Lead Scientist level V
[REDACTED] Engineer Specialist
[REDACTED] Lead Engineer
[REDACTED] Engineer Specialist
[REDACTED] Lead Engineer
[REDACTED] Lead Scientist level IV
[REDACTED] Subject Matter Expert I
[REDACTED] Subject Matter Expert I
[REDACTED] Subject Matter Expert I
[REDACTED] Lead Scientist level I
[REDACTED] Subject Matter Expert I
[REDACTED] Mission Analyst
[REDACTED] Mission Analyst
[REDACTED] Mission Analyst
[REDACTED] Subject Matter Expert I
[REDACTED] Mission Analyst
[REDACTED] Mission Analyst
[REDACTED] Mission Analyst
[REDACTED] Mission Analyst
[REDACTED] Mission Analyst
[REDACTED] Mission Analyst
[REDACTED] Senior Engineer level III
[REDACTED] Executive Assistant RTB
[REDACTED] Corporate Attorney
[REDACTED] Accountant
[REDACTED] Subject Matter Expert IV
Page 12 ↗
[REDACTED] Mission Analyst
[REDACTED] Mission Analyst
[REDACTED] Executive Secretary
[REDACTED] Receptionist
[REDACTED] Director of security
[REDACTED] Security Officer
[REDACTED] Security Officer
[REDACTED] Security Officer
[REDACTED] Security Officer
[REDACTED] Security Officer
[REDACTED] Security Officer
[REDACTED] Security Officer
Utah Ranch Security Officers
Page 13 ↗
(3) PROGRESS ON OBTAINING CLEARANCES FOR BUILDINGS AND STAFF
A. Building Clearances
During October-December 2008, there were multiple communications and information exchanges between BAASS administrative/legal support staff with officials from the Defense Security Service (DSS) regarding requirements for attaining facility Security Clearances. This culminated in BAASS receiving a letter from DSS on January 29, 2009 saying:"Reference is made to our earlier correspondence regarding the eligibility of your facility for a Department of defense security clearance. I am pleased to advise that the necessary processing has been completed and a security clearance at the TOP SECRET level is hereby granted your facility". Further, following a DSS inspection in May 2009, BAASS received a letter, dated June 3, 2009 from DSS indicating that BAASS was in compliance with all requirements of the National Industrial Security Program Operating Manual (NISPOM).
Page 14 ↗
B. Staff Clearances
Because of the highly sensitive information that BAASS is tasked to procure and research, the sponsor facilitated the expeditious granting of TS/SCI security clearances to the individuals listed in Table II.
Table II: Summary of BAASS Security Clearances (July 23, 2009)
Individual Relationship to BAASS Clearance Level
[REDACTED] Administrator TS/SCI
[REDACTED] Deputy Administrator TS/SCI
[REDACTED] Senior Analyst Level V TS/SCI
[REDACTED] Lead Program Manager TS/SCI
[REDACTED] Lead Program Manager TS/SCI
[REDACTED] Director of Security TS/SCI
[REDACTED] Senior Project Manager TS/SCI
[REDACTED] Executive Assistant TS/SCI
[REDACTED] Director of IT TS/SCI
[REDACTED] Contractor to BAASS TS/SCI
[REDACTED] Contractor to BAASS TS/SCI
[REDACTED] Contractor to BAASS TS/SCI
*In final stages of processing
In addition, beginning in July 2009, all BAASS employees (see Table I) are currently being processed for Secret security clearances through DSS.
Page 15 ↗
BAASS DIVISIONS AND ORGANIZATIONAL SUMMARY
This aggressive pace of hiring has resulted in a fully staffed organization capable of researching advanced aerospace technologies in the United States and in some foreign countries.
BAASS (see organization chart Appendix 1) is organized into several separate divisions each with its own specific tasking. They are: Analysis Division, Translation Division, Security Division, Scientific Research Division and Special Investigative Division (SID).
Analysis Division
A project of central importance for BAASS operations is the creation of a data warehouse eventually involving up to a dozen separate data streams, all of which have to be closely scrutinized and formatted into the BAASS "Capella" format (see section 2C7 for a more complete description of the Capella database structure). The BAASS analysis division has two main assignments: (a) the close scrutiny of all data that need to be imported into the BAASS database and the actual accomplishment of that importation, categorization and reformatting task and (b) to analyze the content of thousands of files concerning the performance of advanced aerospace vehicles that have been recently made available on the Internet by the governments of the United Kingdom, Canada, France, Denmark, Brazil and others. The BAASS analysts carefully analyze and categorize the reports and then transfer the reports into database "Capella" format. For a full description of this activity, see section 2C7.
Scientific Research Division
BAASS has PhD scientific talent from both the biological and physics/engineering disciplines.
Physics: A primary requirement for the in house physics division is to query the BAASS database from the perspective of all 12 technical topics in order to glean the maximum content regarding performance of advanced aerospace vehicles in United States airspace and the airspace of other countries.
The BAASS physics division is also tasked with creating the highest quality research and analytical SOPs for conducting research on advanced aerospace vehicles. This includes researching and procuring state of the art instrumentation for measuring the magnetic field, electric field, electromagnetic radiation, ionizing radiation, optical, acoustic "signatures" of UAP. In addition the BAASS physics division is tasked with bringing all baseline data, standardization protocols and measurement parameters on these topics inside BAASS.
Thirdly, the physics division is tasked with studying the twelve technical areas as closely as possible and constructing a set of information-rich questionnaires for BAASS investigators so that they may question eyewitnesses in the field in such a way as to yield the maximum level of productive, technical information. This information in turn, when databased in the Capella format, will yield valuable physics and engineering clues regarding the performance of these exotic aerospace vehicles.
Fourthly, in the event that BAASS acquires exotic hardware, the physics division will be intimately involved in the design of analytical protocols for novel materials.
Biology: Since UAP field effects on biological organisms (soil bacteria, insects, plants, animals and humans) all have widely disparate methods of being detected, the BAASS biological division is tasked with researching the best available methodologies for gleaning information on the effects of UAP fields on biological organisms. These research protocols include (a) new ways of analyzing soil bacteria, (b) instrumentation for quickly delineating the trace element composition of soil, foliage or animal tissue in the field, (c) new non-invasive ways of detecting the biological consequences of ionizing and non-ionizing radiation on a variety of plant, animal and human species.
Page 16 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Further, the biology division is tasked with researching the physiological and pathological consequences of UAPs on humans, including researching all documented effects on humans (physiological and pathological) with a view to learning additional parameters on the technology originally used to cause the these changes.

Translation Division

As briefly described above, the governments of France and Brazil have recently released considerable UAP case files onto the Internet. In addition, BAASS has a strong interest in expanding some nascent relationships with several South American countries. The BAASS translation division is firstly concerned with the translation (and sometimes the analysis) of said documents. Secondly, BAASS has on occasion been able to deploy investigative teams to other countries. The translation division is tasked with assisting with these deployments whether as in situ interpreters, telephone translators or as analysts of cultural and sociological norms in a target country.

Security Division

On March 16, BAASS hired a full time Director of Security who has the responsibilities to lead a team of security guards at multiple BAASS facilities and the corporate headquarters. The BAASS security division is responsible for:

• Develop, implement, and oversee policy for facility, physical, information systems, and personnel security programs for SCI and collateral facilities in accordance with company and US Government regulations.
• Developing procedures in compliance with US Government and corporate policy and regulations for accountability of classified documents and corporate sensitive documents.
• The subject matter expert regarding Operations Security (OPSEC).
Page 17 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

• Develop an OPSEC and security program for BAASS.
• Educate and train staff on security procedures in accordance with US Government policy and regulations.
• Process BAASS personnel for SCI and collateral security clearances.
• Maintain security clearance status for BAASS and corporate personnel.
• Establish and maintain BAASS COMSEC accounts with US Government agency.
• Maintaining director liaison and interact with US Government agencies ensuring compliance with regulations and ensuring positive relations with the different agencies.
• Track security clearance investigations and perform administrative support functions to include Joint Personnel Adjudications System (JPAS) and eQIP administration.

Investigative Division

SPECIAL INVESTIGATIONS DIVISION

Purpose: The purpose of the investigations division is to conduct field and in-house investigations targeting technology that is represented by, or associated with, Unidentified Aerial Phenomena (UAP). Clear investigative processes and techniques, as well as established and validated evidence collection procedures are used. Scientific and evidentiary rigor is used in a consistent manner to ensure effective and reliable investigations.

Organization: Currently the Investigations Division is organized into Senior Investigators and Field Investigators, with one Program Manager-Investigations (Chief Investigator). There are four Senior Investigators and twelve Field Investigators. The Investigations Division will be reorganized into four teams, each headed by a Team Leader (Senior Investigator). This ensures positive span-of-control for supervisors, as well as an effective chain-of-command structure for all personnel. It is anticipated that this re-organization will facilitate a more
Page 18 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

efficient command structure and investigative processes. The BAASS SID organizational chart is included in Appendix 1.

Field Investigations

Field Investigations are conducted by Senior Investigators and Field Investigators. Both national and international investigations have been conducted to date. Investigative personnel all have an investigations background, derived from civilian law enforcement, U.S. military, the intelligence community, and in some cases, a combination of these abilities.

Standard Operating Procedures: BAASS SID (Special Investigations Division) has established an SOP (Standard Operating Procedure) so that Investigators will conduct themselves in a consistent manner while conducting investigations. The SID SOP is not intended to be an all encompassing set of procedures, simply a basic guideline for the conduct of field investigations for Bigelow Aerospace Advanced Space Studies (BAASS). Assigned investigators should use this information as a basic starting point in the conduct of a field investigation. This will be an ever evolving set of procedures/guidelines (ie. "living document"). Investigators, in concert with other BAASS employees, should always bring suggestions for changes to the attention of the Special Investigations Division (SID) Chief, Senior Investigators, and/or senior BAASS management. One of the most important aspects of the BAASS Investigative mindset must be to maintain an open minded and, above all, unbiased mindset toward the investigative process. Ensuring that all investigative personnel pursue each investigation in a thorough, unbiased, finder-of-the facts manner is imperative to the success of the BAASS Mission.

The BAASS SID SOP is included in this document as Appendix 2.
Page 19 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Report Management System (RMS)

In the development phase of the Bigelow Aerospace Advanced Space Studies (BAASS) Investigations Division, it became apparent that a report management system would be needed. We researched local Law Enforcement agencies to determine the types of systems that were currently being used. Several outside sources were contacted to include Motorola, Crime Star, and Nine Eleven Software, to name a few.

Due to the nature of our business, the Report Management System (RMS) needed to operate in a secure environment, and not be accessible to the general public. The issue with most systems is that they are strictly written or hard coded for Law Enforcement agencies or other governmental agencies. Since we needed a system that could be modified to fit our specific needs, Nine Eleven software was chosen. This package was chosen based upon our desire to modify a typically hard coded system to accomplish our objective of creating a complete system to encompass BAASS protocols.

The Report Management System is comprised of a Computer Aided Dispatch system (CAD), Record Management System (RMS), Electronic Report Writing, Electronic Evidence, Property Room Management, Case Imaging, Work flow Management System, Mapping Capabilities, and a Human Resource System. Introduction: The RMS is an electronic report management system that includes a report approval process that is also capable of producing statistical reports in order to manage case investigations. It is installed on an Intranet based web server that is located in a secure network established for BAASS. This web service is ONLY accessible from within the secure BAASS network and is not accessible through the public internet. The system allows BAASS Investigators to create electronic reports through a secured web interface. The finished report goes through an approval process before being locked into a finalized report. The secured intranet web based system gives authorized users the ability to access the system from any computer with internet access from any location. This is very critical for efficiency of case reporting for Investigators in the field.
Page 20 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

A. Computer Aided Dispatch (CAD)

1. The CAD system contains two sets of tables. One set is dedicated to live calls to insure the smallest dataset possible for quick data response. The other set contains the historical closed call information allowing for closed case recall.

2. It contains an extensive system journaling that records and saves all modifications to a case or call.

B. Record Management System (RMS)

1. The records management section contains a master name index.

2. The master name system will automatically search for an existing record when any new (person) information is added. This allows for a comprehensive data base of witness information, involved parties, and known associations.

C. Electronic Report Writing

1. The electronic report gives the capability of remote report writing in the field. The investigator is able to conduct the field investigation and complete the report in the field giving the approving party the opportunity to review and approve in real time.

2. The system creates a permanent record of every report and is viewable through Microsoft Office.

3. The reports can be set for "RESTRICTED ACCESS" only allowing authorized viewing.

4. Incident factors can be customized in order to track items of specific interests.
Page 21 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

5. Scanned documents, images, notes and audio/video files can be uploaded to a case file and viewed in a single source location.

D. Property Room Management

1. This gives Investigators the ability to enter evidence/ property electronically while in the field. This will be accomplished through an electronic barcode system.

2. The Property Room Management system keeps track of all the items that have been entered into the system.

3. You can see at a glance if an item has been checked out, sent to a lab, returned to owner, or if it has been viewed and by who.

4. Keep track of where an item is located in the property room.

5. Detailed monthly reports can be generated showing the status of items in the property room to include BAASS purchased equipment.

E. Human Resource System

1. The HR system contains employee information, photos, emergency contact information and personnel information.

2. This information can be marked as private and viewed only by authorized personnel.
Page 22 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

CONCLUSION: The purpose of the Records Management System (RMS) is to manage case files in an efficient and effective manner, which would enable authorized personnel the ability to track documents, the chain-of-evidence process, and cases of special interest. Case files will include investigative reports, witness statements, photos, videos, scanned documents, and forensic/scientific results of analysis.

The RMS gives us the opportunity to coordinate investigations in real time with the ability to communicate directly with authorized personnel within the Chain of Command. BAASS is able to define forms and processes within this Report Management System, as compared to other hard coded systems that do not allow modifications. This will allow authorized personnel the ability to query the system for specific information at any given time.

As an added SECURITY MEASURE, the RMS enables SECURE transmissions with encrypted data connections with field personnel/laptops. The encrypted connections SECURITY aspects include over three thousand random access points to prevent invalid data entry and/or retrieval. In addition, there is an internal logging system that lets us know whenever anyone accesses the case file, whose accessing the file, and what they do in the case file.

Research and Acquisitions of BAASS Investigative/Laboratory Equipment

The research into the recently acquired investigative and laboratory equipment was a time consuming effort on the part of many BAASS employees in order to obtain the latest technology at the most reasonable cost. BAASS scientific staff spent hours investigating the latest equipment in their areas of expertise, and had several on-site demonstrations for the various pieces of equipment they were looking at. A discussion of the scientific equipment will be prepared by BAASS scientists. The investigative equipment was researched mainly BAASS investigators.
Page 23 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

The Sony A350 digital camera (with three interchangeable lenses) and the Sony Handy-Cam are high quality amateur grade cameras. While they are both fine for daylight photography, the realization of professional grade equipment with very low light capabilities was underlined after BAASS Investigators completed their first deployment.

After extensive research utilizing the internet and interviewing local camera shops, it was learned that the Canon SD Mark II is currently the best technology for low light still cameras. With a maximum ISO of 26,500, it is possible to take high quality low light photographs in very low light conditions. As we are able to use a faster shutter speed, the images of lights at night come out much more clearly than using the Sony A350 with a long (1 to 2 second) shutter speed. Each of these cameras is equipped with a 24mm-105mm zoom lens and an f4L 300mm image stabilization lens, which routinely give clear images even if used without a tripod.

While researching the SLR cameras, professional grade video cameras were also researched. As the Sony HVR A1U/A1N has been used with good results at the Utah ranch, it was decided to stay with this model in the Investigators kits. The camera comes with a 20X zoom capability, and more importantly has infrared capabilities. While a small IR light is built into the camera, it only has a distance of 15 to 30 feet. This has been supplemented by purchasing 3 two million candle power IR spotlights, which will send an IR beam a minimum of 225 yards. Two brand new Sony A1U/A1N cameras have been ordered, a third is in inventory from NIDS, and the small Sony Handy-Cam will remain as a backup.

The process for investigating these cameras was both time consuming and exhaustive. Numerous internet searches of camera sites, photography sites, and videographer sites were conducted. These included manufactures sites, discussion sites, consumer sites, and other to read the pros and cons of all makes, as well as user reports of people already using the equipment. After an exhaustive internet investigation, we visited local camera stores for further information and pricing options.

Page 17
Page 24 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Along with our research into cameras, the same effort went into choosing our laptop computers, GPS unit and other electronics. We currently have 2 Fujitsu T1010 "Lifebook" laptop computers for field use. These are highly durable units which are capable of being used in the field as well as an office. While our first choice of a laptop was a Sony Toughbook, we found that the Fujitsu is highly rated for durability, ease of use, and priced substantially lower than the Sony. We have had no problems with these units, and are confident in our choice.

BAASS GPS is a Garmin Colorado 400t. This purchase was made not only after exhaustive internet comparisons, but also on personal knowledge of the unit. A BAASS senior investigator knows this to be an extremely durable and reliable unit from using its predecessors in both Iraq and Afghanistan. All information can be downloaded via USB into our laptops, and it can be used while on-line. Further, mapping programs are available if the need arises.

The remainder of electronics were chosen both for durability and portability. Our printer and scanner (Hewlett Packard H470wbt and Visioneer "Road Warrior") were designed for lightweight reliability. They are easy to pack, lightweight, and affordable. Along with these items, we have two Toshiba HDDR500E03X external hard drives to facilitate additional storage and backup of data obtained in the field. Three small VEHO VMS-001 Microscope cameras have also just been added to our field kits. This enables us to gather data at up to 200X magnification, and save directly to the computer. All equipment is USB compatible, so priority information can be sent to BAASS in a timely fashion.

BAASS night vision consists of two generation III ITT binoculars left over from NIDS. Also, we currently have one set of daytime binoculars from NIDS, as well as one Geiger counter from NIDS.

Basic Equipment

The following is a list of basic equipment sent out on a normal deployment.

Page 18
Page 25 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

• ELECTRONICS
o Lap top with reporting software
o Portable printer
o Portable scanner
o Digital camera-Canon 5D Mark II w/24mm x 105mm lens
▪ 300mm lens
▪ Tripod
o Video camera-Sony HDR A1N/A1U
▪ Tapes
▪ Tripod
o Digital Voice Recorder
o Garmin GPS
o Stream Light flashlight (2)
o IR Spotlight
o Extra batteries/charging units
o Night Vision
o Binoculars
o Geiger counter
o Compass
o Posse Box w/forms
o Power supply/converter

• EVIDENCE COLLECTION
o Collection tubes
▪ Small (10)
▪ Large (10)
o Poly jars
▪ 4 oz. (6)
▪ 6 oz. (6)
▪ 16 oz. (3)
o Storage boxes
▪ 8"x8"x8" (2)

Page 19
Page 26 ↗
■ 12"x12"x12" (2)
■ 13"x8"x4" (2)
o Storage bags (paper)
■ 7"x4"x13.5" (25)
■ 8"x5.25"x15.5" (25)
■ 12"x7"x17" (5)
o Sure seal (plastic)
■ 4"x9" (25)
■ 6"x9" (25)
■ 9"x12" (25)
■ 12"x16" (25)
o Glassine envelopes (clear breathable paper)
■ 2"x3.5" (25)
■ 2.75"x4.25" (25)
■ 5.5"x5.75" (25)
o Sterile cotton swaps
■ 6" (25)
■ Swab boxes (evidence-25/control-25)
o Dial thermometer
o Stainless trowel
o Bio-hazard labels (roll of 50)
o Half face respirator (2)
o Respirator filters (4)
o Bio-hazard suits (4)
o Medical grade tweezers set
o Micro flex gloves-powder free (1 box)
o Magnetic rulers
o Mixing bowls
■ 1 pint
■ 1.5 quart
■ 1 gallon
o Casting equipment
Page 27 ↗
■ Dental stone (10 lbs)
■ Snow wax (when applicable)
■ Sifter
o Casting boxes
■ Footprinti– 19"x12" 3" (3)
■ Tire – 23"x13"x3" (3)
o Casting frames
■ 7.25"x10"x18" (3)
■ 12"x15"x28" (3)
o Evidence marking flags (100)
o Poncho (2)
o 6'x9' plastic tarp (1)
o Medical grade utility shears
o Tape measure (steel-25')
o Tape measure (cloth-100)
o Pens, pencils, sharpies
o Cigarette lighter (sterilization)
o Alcohol wipes
o Sterile wipes
Equipment Review
After using out current equipment on the initial deployment to Oregon, we found that most of our equipment served well in the field. Below, are some suggestions as to how certain new equipment or upgrades in current equipment would benefit BAASS investigators.
Cameras: The current SONY SLR camera is fine for daytime pictures, but has a low ISO for night time photos. Currently, Sony only makes one 50MM lens that will enhance low light capabilities and this is a 50MM lens for a price of $350.00. This lens would give us 4 times the light gathering ability in low light condition. Bear in mind, however, the Sony has an ISO of only 1600. After making inquiries at local camera shops, I learned of the Canon 5D Mark II camera.
Page 28 ↗
The camera has an ISO of 25,600. Basically, using our Sony at night with a long shutter speed (1.5 seconds) and large aperture opening will give us a fuzzy picture in dark conditions. Due to the high ISO of the Canon, the shutter speed alone (for the same aperture setting) would only be 1/16 of a second for a better quality photo. The Canon camera has a list price of $2800.00. Low light, anti-vibration lenses of 50MM and 300MM cost $400.00 and $1400.00 respectively. A 500MM lens is available for $7000.00. As we are trying to set up 3 Investigator kits, I would suggest buying 2 of the Canon set ups, leaving the Sony as the 3rd.
The video camera is also acceptable for daytime operations, but the low light capabilities are also limited. After talking to the staff at local camera shops, they recommended the Sony VX2100 as the best nighttime/low light video camera available without going to a professional grade camera. While professional grade models will produce better sound and video quality, several independent reviews state that the low light capabilities are excellent on the camera. The cost is $1200.00, and it should be noted that the standard battery will give almost 12 full hours of shooting time.
Laser Range Finder: This is a necessary piece of equipment not yet in our inventory. We encountered very steep and rain soaked inclines, making it impossible to get accurate distance measurements. Range finders in the long range (1200+yards/meters) start at $400.00 and go up to $2800.00 for a military grade unit capable of distanced of 2600 yards/meters.
Optics: The optics we currently have are fine. It was suggested that a telescope or spotting scope be added for the extremely long distances we are likely to encounter in the field. Additionally, some of these instruments can be adapted to cameras for extremely long range photos of filming. Prices range from $120.00 to $1500.00.
Evidence Gathering: The kit we currently have set up is more than adequate for a general investigation. It is suggested, however, that unless there is a high probability of gathering large amounts of forensic evidence, a smaller, briefcase size kit be utilized. The current kit weights over 100 pounds as currently
Page 29 ↗
set up, and we feel will not be needed on most assignments. A smaller unit could easily be designed, easier to carry, and most likely could be used as a "carry on" for airline travel.
General Electronics: Two or three small power strips should be added to each kit. We found it difficult to charge batteries due to limited outlets in the motel.
Vehicle: A full size SUV is mandatory for future assignments. We used a mid-size SUV, and had to leave ½ of the rear seat for luggage/equipment. Also, most full size SUV's have 110 outlets already set up in the vehicle for utilizing/re-charging our equipment while on site of an investigation.
Recent (June 2009) Acquisition of New Analytical Equipment for Field Deployment and Lab Analysis
1. Veho VMS-001 200X 1.3 Megapixel Digital USB Microscope
This instrument is a very portable (4.4 x 1.3 inches) digital microscope which expands the capability of the field investigators. The microscope allows detailed images to be taken at 20X to 200X magnifications. The device connects directly to a laptop and can take still pictures and also video. The instrument comes with imaging software included. The 1.3 Megapixel allows for high resolution images to be taken. Illumination is via 4 built in white LED lights.
2. Celestron 44340 3.5" LCD Digital Microscope
This instrument is a bench top digital microscope. The microscope has magnification capabilities of 40-400X extending up to 1600X with digital zoom. Images can be uploaded to a PC or laptop via a USB connection. The instrument comes with a built in digital camera. This would be used in the laboratory in the new facility and would be a less expensive alternative to
Page 30 ↗
traditional microscopes. It comes with its own carrying case and could also be taken into the field if required.
3. Niton XL3t 900S GOLDD Analyzer
This instrument is an X-ray fluorescence (XRF) analyzer. The device analyzes the emission of characteristic "secondary" (or fluorescent) X-rays from a material that has been excited by bombarding with high-energy X-rays. XRF is widely used for elemental analysis and chemical analysis, particularly in the investigation of metals, glass, ceramics and building materials, and for research in geochemistry, forensic science and archaeology. The instrument allows for a rapid (15-30 sec) on site elemental analysis of soils and alloys at the PPM (mg/Kg) level.
4. Colibri TTC handheld dose rate meter
This instrument package allows for the detection and quantification of alpha, beta and gamma radiation in the field. The ability to accurately measure and quantify these three types of radiation adds another critical level of capability to the BAASS arsenal of analysis. The package come with the SABG-100 Alpha, Beta, Gamma external probe which connects to the meter and allows detection of all three types of radiation and CSPS-R Colibri and probe calibration software.
5. Hand held Spectrum Analyzer Pro Bundle 3 (NF-5030 and HF 60100)
These are instruments designed to detect and measure a broad spectrum of electromagnetic (EMF) radiation and high frequency radiowaves. The NF-5030 measures 3-D magnetic fields from as low as background up to 20
Page 31 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Gauss. Electric fields are measured from 0.1 V/m to 20 kV/m and frequencies from 1 Hz to 30 MHz. This broad range handheld EMF detector easily combines 3 or more detection devices into one compact device. This device is unique in the fact that it combines capabilities of 3 or more necessary field readings and ranges as compared to separate devices with inferior capabilities. The HF-60100 measures high frequency radiofrequencies (RF).

BAASS Evidence Collection Protocols

Types of evidence that might be collected:

• Soil
• Plant material
• Liquids
• Metallic and/or nonmetallic objects/artifacts
• Swabs of hard surfaces
• Radiation readings (hand held detector)
• Elemental analysis (XRF instrument)
• Magnetic field readings (EMF detector)
• Microwave field readings (RF detector)
• Noninvasive animal or human tissue samples (i.e. hair, fingernail clippings, skin surface swabs)

Prior to taking any samples, a thorough documentation of the location should be done.

Sketch of location (compass headings, structure locations, witness location, location of object relative to witness, location potential landing traces, location of readily visible physical evidence, etc). Identify and note the location of anything

Page 25
Page 32 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

unusual. Examples could be bent or broken vegetation, scorch marks on the ground or vegetation, unusual depressions in the soil, potential artifacts, etc.

Use of evidence flags to mark the site should be employed to aid in documentation and as a visual aid in collection of evidence.

The site should be documented by photographs and video. GPS readings should be employed to mark all relevant features and the locations of evidence taken. A history of use for the site should be generated provided such information is available. For example, was the site used as a pasture, were crops grown, if so, what types, was there any disturbances such as plowing or earthmoving/backfilling?

Samplings should proceed from the periphery and progress inward to minimize contamination and dispersal of potential evidence. Control samples of the same type of material need to be obtained from locations at a minimum distance of 10-15 feet outside of the periphery. For example, if plant material is collected inside the periphery, the same type of plant material must be sampled from outside the periphery.

Prior to any physical samples being taken, nondestructive surveying of the site should be taken using the instruments indicated below. In the absence of visual physical evidence (scorch marks, bent or broken vegetation, depressions in the soil), surveying might be able to define the location and dimensions of the site, allowing for more efficient sampling and minimizing unnecessary samples.

a. Radiation monitor
b. Electromagnetic field (EMF)
c. Radiofrequency (RF)
d. X-ray Fluorescence (XRF)

Should any elevated readings be obtained with the above instrumentation, relevant samples should be obtained before proceeding with the survey.

Page 26
Page 33 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

1. Radiation

The Colibri TTC handheld dose rate meter allows for the detection and quantification of alpha, beta and gamma radiation. The instrument is connected to a hand held probe which the user can toggle between three detection modes: Alpha only, Beta only, and Alpha + Beta + Gamma. The dose rate meter by itself (no external probe) can measure gamma radiation only.

2. Electromagnetic Fields

Specific details are in the process of being developed.

3. Radiofrequency

Specific details are in the process of being developed.

4. X-Ray Fluorescence

The XRF instrument allows for the rapid (15-30 sec) elemental analysis of soils and alloys at the PPM (mg/Kg) level. The device analyses the emission of characteristic "secondary" (or fluorescent) X-rays from a material that has been excited by bombarding with high-energy X-rays.

Specific details are in the process of being developed.

Sampling Protocols:

1. Soil
All soil samples should be maintained as discrete samples and not combined (composited). This will allow for more precise determinations of potential variations at the site. As opposed to the sampling procedures for non-UAP analyses (i.e. environmental and agricultural), the upper layer (~

Page 27
Page 34 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

2-3 inches) of soil is of primary interest. At an absolute minimum, three discrete samples from outside of the defined physical site and three discrete samples from within the site need to be taken. More samples can be taken if the site covers an unusually large area. Care should be taken to avoid atypical areas such as especially rocky or areas of poor plant growth. The reason for this is to minimize inherent variation within the site by obtaining samples which are as similar as possible.

a. Soil compaction:
The use of a device known as a penetrometer can be used to determine the level of soil compaction as might result from a heavy object making contact with the soil surface. Note that excessively dry soils will appear more compacted and wet soils will appear less compacted. If either condition is present, a note should be made. Depending on the type of penetrometer employed, readings will be in either tons/square foot or pounds/square inch. As this is a nondestructive sampling procedure, multiple measurements should be made both within and external to the site.

b. Soil cores:
The easiest method to take multiple soil samples is through the use of a soil corer. This is a hollow tube typically made of stainless steel which is either pushed or pounded into the soil to the desired depth. Upon removal, a cylinder shaped soil sample is obtained which is then transferred to a suitable container. Plastic liners are available which can be used to ensure the integrity of the soil core. Corers are available in a range of diameters, typically from around 1 to 3 inches. For most types of analyses, a small diameter core size (i.e 1 inch) is preferable as these analyses do not typically require a large sample. Additionally a one inch diameter core sample will fit perfectly within a disposable 50 ml Falcon tube, which will also allow a core length of around 3.5 inches, which is suitable for the majority of laboratory analyses. Using plastic liners also

Page 28
Page 35 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

eliminates the need to clean the inside of the corer between samples, although the outside and bottom cutting edge should be cleaned between samples. This would include removal of adhering soil with a wet paper towel and wiping the surface with an alcohol pad. Samples should be kept cool but not frozen. If available, the samples ideally should be placed in a cooler on ice until shipment to BAASS can be arranged.

c. Soil surface samples:
In addition to the core cores, surface scrapings should also be collected for analysis of any residues left behind by the object. These samples can be obtained by carefully removing the top ¼ to ½ inch layer of soil with a trowel or spatula. In the case of vegetated areas a lot of dead plant material may be coating the soil. In this case, the sample will consist of the plant material and very little of the soil itself. The sample should be placed into 50 ml Falcon tubes. Samples should be kept cool but not frozen. If available, the samples ideally should be placed in a cooler on ice or in a refrigerator until shipment to BAASS can be arranged.

d. Plant roots:
In instances where the site is vegetated, root samples should also be taken. This would apply primarily to annual plants as these have less extensive root systems than perennial types of plants. To accomplish this, the use of larger diameter soil corers (i.e. ~ 3 inch) is one option, especially in cases where the soil is extremely hard and/or dry. If the soil is relatively soft, attempts may be made to remove the plant in its entirety using a digging instrument such as a trowel. The above ground portion of the plant should be removed and placed into a separate container, preferably a paper bag. As indicated above, samples should be kept cool but not frozen. If available, the samples ideally should be placed in a cooler on ice until shipment to BAASS can be arranged.

Page 29
Page 36 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

2. Plant material

Plant samples should be obtained from locations internal and external to the site. If possible, different plant species should be kept separate from each other. During the initial visual examination of the site, any plants that were identified to be damaged or unusual in any manner should be sampled and the location documented. These include, but are not limited to:

• Bent or broken stems or branches.
• Burned/scorched foliage
• Chlorotic foliage (no chlorophyll) this is distinct from dead plants
• Unusual clump of dead plants

a. Above ground plant material:
Photo document plants prior to any sampling. Plants should be removed as close to ground level as possible. A sharp knife may be used, but a set of pruning shears or scissors are probably more effective. Be sure to clean the cutting surface with a wet paper towel followed by wiping with an alcohol pad after use. Disposable gloves should be worn and changed after each sampling. Try to keep different types of plants separate. Plant material should be placed in appropriate size paper (not plastic) bags and secured with evidence tape. Samples should be kept cool, but under no circumstances frozen.

b. Plant Roots:
Plant roots should be sampled as indicated above.

3. Liquids
Although not anticipated to occur often, collection of liquids is possible. This could include
• any standing water on the site
• any other liquids/gels
Page 37 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

This would not include any flowing water such as a stream or creek. Samples of water or liquids may be most easily obtained though the use of sterile disposable pipets and should be placed into disposable 15 ml Falcon tubes. In the event that a gel like substance might be encountered, a spatula may be used to carefully place the material into a 15 ml Falcon tube. Be sure to wipe the spatula with an alcohol pad prior to taking the sample. The samples should also be kept cool, preferably on ice or in a refrigerator, but not frozen until shipment back to BAASS.

4. Metallic/nonmetallic Objects:
Note location of all objects at the site and record their location. In the case of apparent metal alloys, the XRF device can be used to determine the precise elemental composition of the object. This can indicate if the object is comprised of a commonly encountered alloy or is an unusual or unknown alloy which would necessitate collection. Fresh gloves should be worn when collecting and analyzing the object. The object can be placed in an appropriate sized plastic or paper bag and sealed with evidence tape. The object can be kept at room temperature until delivery to BAASS.

5. Swabs of surfaces:
In the event that there are objects in the immediate vicinity of the event that have a hard impermeable surface such as an automobile swabs can be taken from the surface. The vehicle should also be examined for any physical damage (dents, burn marks) or the presence of any foreign material. The taking of samples should be dependent on the time since the event occurred and whether any precipitation occurred that might have washed surface evidence away.

a. Small area: For small areas to be sampled a cotton swab (i.e. Q-tip) moistened with water should be used to sample small areas. The swab
Page 38 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

should then be placed in a 15 ml Flacon tube and can be kept at room temperature until delivery to BAASS.

b. Large area: For larger areas to be sampled, a gauze pad moistened with water should be used to wipe a defined area. The pad should then be placed in a suitable container such as a 30 or 50 ml sample cup and kept at room temperature until shipment to BAASS. The possibility of using the XRF to identify unusual elements may be a possibility and should be evaluated.

6. Noninvasive animal or human tissue samples:
Investigators should inquire as to whether noninvasive tissue samples can be collected from the witness and/or any animals which have been present. These would primarily include hair and nail samples from animals, and fingernail clippings from people. Hair samples should be cut as close to the skin surface as possible and placed into 15 ml Falcon tubes. Samples can be stored at room temperature until shipment to BAASS. Nail clippings should be separated according to what hand/limb they were collected from and placed into 15 ml Falcon tubes and kept as cold as possible until shipped back to BAASS.

Identification of Laboratories for Independent Analyses

Chemical Analysis, Materials Characterization

1. UNLV, Las Vegas Nevada:
a. Chemical Analysis, Materials Characterization
b. Mechanical Properties
c. Microscopy
d. Molecular Characterization
e. Microbial Services
Page 39 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

2. Metallurgical Technologies, Mooresville, NC
a. Chemical Analysis, Materials Characterization
b. Mechanical Properties
c. Microscopy

3. Evans Analytical, Sunnyvale, CA
a. Chemical Analysis, Materials Characterization
b. Mechanical Properties
c. Microscopy
d. Molecular Characterization

4. Impact Analytical, Midland, MI
a. Chemical Analysis, Materials Characterization
b. Mechanical Properties
c. Microscopy
d. Separation Science
e. Thermal Analysis
f. Organic Compound Characterization

5. Silver State Analytical, Las Vegas, NV
a. Microbial services
b. Chemical Analysis, Materials Characterization
c. Metal analysis
d. Separation Science
e. Organic Compound Characterization

6. Columbia Analytical Services, Tucson, AZ
a. Microbial services
b. Metal analysis
c. Chemical Analysis, Materials Characterization
Page 40 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

7. Legend Technical Services, Inc, Phoenix, AZ
a. Microbial services
b. Metal analysis
c. Chemical Analysis, Materials Characterization
d. Separation Science
e. Organic Compound Characterization

8. EMSL Analytical, Inc, Westmont, NJ
a. Microbial services
b. Chemical Analysis, Materials Characterization
c. Separation Science
d. Organic Compound Characterization
e. Molecular Characterization

9. Elemental Analysis, Inc, Lexington, KY
a. Metal analysis
b. Chemical Analysis, Materials Characterization

10. Basic Laboratory, Redding, CA
a. Microbial services
b. Radioanalysis

Microbial analyses

1. Soil Foodweb Oregon, LLC, Corvallis, OR
a. Microbial services

2. BBC Laboratories, Tempe, AZ
a. Microbial services

3. Microbial Insights, Rockford, TN
a. Microbial services
Page 41 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Electron Paramagnetic Resonance Spectroscopy Analysis of Fingernails

This is a technology whereby estimates of a radiation dose (dosimetry) received by an individual can be determined after an event. This is a noninvasive type of analysis which requires only fingernail clippings from the exposed individual(s). A pioneer in this type of analysis is 1843(a)(2) 1843(a)(2) A phone call conversation with 1843(a)(2) indicated that this type of analysis was available for BAASS to contract with a private company startup.

Relevant Information:

1. Optimum time interval for sampling: No longer than 3-4 weeks after the event.
2. Sample size: 20 mg minimum (approximately one fingernail)
3. Storage conditions: At least -30°C, (preferably -80°C). Also keep nails dry.
4. Type of radiation exposure: 1843(a)(2) deals primarily with ionizing radiation, UV could possibly give a signal, but 1843(a)(2) is uncertain that radiowaves and microwaves would leave a detectable signal, but it might be worthwhile anyway.
5. Appropriate control could consist of fingernail clippings after new nail growth appears.
6. Estimated cost would run a couple hundred dollars, depending on number of samples to be run.
7. To run analysis, contact 1843(a)(2) to obtain detailed information.

The key for this type of analysis is prompt collection of evidence and storage at as cold as possible conditions and avoid exposure to moisture and prompt delivery for analysis.
Page 42 ↗
1843(a)(2)

In-House Investigations

Special Investigation Division (SID) Approach To Cases

INVESTIGATIVE APPROACH: The BAASS Investigations Division uses a triage approach to developing case information. All available information is compiled then submitted through various filters. These "filters" include multiple databases, telephone interviews (pre-deployment), as well as investigative analysis. By this triage method we are able to drill down to cases that represent potential valuable leads, information, or evidence. Solid and verifiable evidence, witnesses, and statements are sought after to enhance the possibility of locating technology.

During field deployments SID Investigators utilize and expand on information developed during the pre-deployment process. This includes personal interviews of witnesses, location of additional witnesses, and collection of physical evidence (if present).

WEB SITE DEVELOPMENT: As part of SIDs investigative process development we have an ongoing website identification project. Web links were compiled starting on May 2009. The initial listing was approximately 14 sites but due to continual researching and information located, that list has now grown to 38 UAP specific sites and 23 related and important sites.

In June, the web sites were reviewed to determine which sites allowed for UFO reporting information; this was due to questions that arose about the validity of some of the initial sites listed. Web links on the sites were checked to learn if
Page 43 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

UFO reports could be gathered at whatever site were being examined and if there was any information as to the witnesses' identity. Some of the reporting sites would direct the witness to a third site and some would sites would gather various reports from well-known UFO reporting sites and then put those reports on their web page.

Various websites are used by Investigators and includes the NOAA web page, Weather Underground (used for obtaining historical weather data), the FAA web page, along with sites listing information on UAV's, obituary notices, and earthquake information. These are all in addition to appropriate UAP websites.

News Media Research Engine

WESTLAW: Westlaw is a good basic media search engine. It was found that Westlaw did not fully meet the requirements for BAASS to conduct media research. Issues included not timely information, too broad and incomplete information.

LOCATEPLUS: Locateplus is more effective for the type of searches the SID is conducting. Locateplus is available to Law Enforcement, Lawyers and Private Investigators only. The general public cannot access this information. Westlaw search database returned a total of 33,664 results for a total of 29 witnesses. Westlaw's search parameters are much too narrow. Westlaw doesn't allow for date/year of birth. Locateplus search database returned a total of 61 witnesses for 23 of the searches and 11,760 witnesses for the remaining 6. Locateplus allows one to search by birth range. (e.g. 1935 to 1945) Utilizing this database would allow the SID to narrow the amount of potential witnesses.

LEXIS-NEXIS: Research was conducted for the best sources to search newspapers from all over the country and around the world for up to the minute, published news stories regarding certain topics, specifically "UFOs" or anything related to the topic.

After contacting several journalists from large newspapers and inquiring about this topic, it was advised that BAASS contact Lexis-Nexis. They advised
Page 44 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Lexis-Nexis is a subscriber based system that pays newspapers a royalty to distribute their content so most newspapers in the US are available.

BAASS made contact with 1843(a)(2) account manager with Lexis-Nexis. After explaining what was needed, he advised Lexis-Nexis will provide that exact service. Lexis-Nexis has access to over 20,000 sources from all over the world including 99% of the newspapers printed in the US, as well as newspapers, business journals, science publications, and many more from around the world.

1843(a)(2) stated an investigator could type in a simple search term such as "swine flu" and would have access to all articles published that day containing those search terms. There is also a capability to search historical records on the subject. An 'ALERT' can be set up by the investigator where he is notified as soon as articles are published with any parameter.

Lexis-Nexis is a subscriber based system so BAASS would have to enter into a subscription agreement to access their services. A sample price quote was for 30 users, the cost would be approximately $500.00 per month. 1843(a)(2) sent pricing information as well as a comparison of Lexis-Nexis with Google News via fax for our review and it is attached to this memorandum.

Regardless of the comparison of Lexis-Nexis with Google News, research was conducted on the best ways to utilize Google News to get the best results for our time when this service is used. The help areas and help message boards of Google were researched, and several helpful tips we could use were discovered, to make the service more effective.

Google News does have access to a large number of newspaper sites and articles. According to most responses from BAASS initiated posts on the Google help forums, a simple search term of "UFO" or "Unidentified Flying Object" should bring up all items with those words. The terms can actually be used together such as: "UFO" OR "Unidentified flying object" with the OR in uppercase letters and without the quotes. If one uses the quotes, Google will only look for the exact word.
Page 45 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Another useful feature of Google News is after a search, the investigator may sort by date or relevance from the right hand column. One may also set up an alert from the search page to alert you whenever an item is posted matching ones criteria. One must create a Google account and sign in to use this feature.

While there are other search engines available, according to many professional journalists, Lexis-Nexis is the most complete, one solution option for what BAASS needs to save time and resources in our research.

RESEARCH AND TECHNOLOGY PROTECTION PLAN

Counterintelligence Support Plan (CISP)

The basics of any CISP are to identify those issues or items that are the most critical components to the company goals. These items are referred to as Critical Program Information (CPI). CPI can come in a myriad of forms; it can be technological devices, information, personnel, the basic mission of an organization, or any combination of these things as well as others. As an example; An HP desktop computer is not on its own CPI. It is an off the shelf piece of equipment. However, the method in which it is used, or how it is connected to another device may make it critical. Simply protecting the method used to connect it to another device or preventing unauthorized individuals from discovering it is not being used as a desktop computer would be the CPI.

Once the CPI is identified the threat to that CPI must also be identified. As referenced in the National Counterintelligence Executive's (NCIX) Report to Congress on Industrial Espionage FY07 (http://www.ncix.gov/publications/reports/fecie_all/fecie_2007/FECIE_2007.pdf). The United States remains the prime target for foreign economic collection and industrial espionage by virtue of its global technological leadership and innovation. Collectors from across the globe—private businessmen, scientists, engineers, students, and foreign military and intelligence officers—engaged in economic collection activities against the United States in Fiscal Year 2007 (FY
Page 46 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

2007), according to information amassed by the Counterintelligence (CI) Community. While collectors came from a large number of countries, those from fewer than 10 nations, including both allies and adversaries, accounted for the bulk of targeting activity.

With the emergence of commercial space interests across the globe, the success of Bigelow Aerospace (BA), the basic mission of BAASS, as well as the anonymity of our sponsors, we are a prime target for foreign and competitive interest, if not direct targeting and collection attempts. Numerous official foreign entities, both friendly and adversarial, have significant interest in all aspects of space and propulsion technologies. Combine this with competitive industrial (private) adversaries and the threat moves higher. Add to the preceding the state sponsorship of many industrial competitors and the threat rises even higher. The simple fact that both BAASS and BA have a research mission adds a level of risk. In order to effectively research and develop new or emerging technologies there has to be some level of scientific exchange. Additionally, the need for BA to utilize foreign partners to launch platforms places an additional burden on the protection of CPI.

While many of these risks cannot be completely avoided the challenge will be to identify acceptable, effective and efficient (both in cost and impact) mitigation of these threats. While the capability does not currently exist at BAASS to explore specific sources of threats (i.e.; specific countries, foreign intelligence entities, etc.) we do have the ability to identify our CPI and, in a broad manner, mitigate the threat.

The Threat

Some definitions of significant importance to this plan:

Trade Secrets: All forms and types of financial, business, scientific, technical, economic, or engineering information, including patterns, plans, compilations, program devices, formulas, designs, prototypes, methods,

Page 40
Page 47 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

techniques, processes, procedures, programs, or codes, whether tangible or intangible, and whether stored or un-stored, compiled, or memorialized physically, electronically, graphically, photographically, or in writing if the owner (i.e., the person or entity in whom or in which rightful legal or equitable title to, or license in, is reposed) has taken reasonable measures to keep such information secret and the information derives independent economic value, actual, or potential from not being generally known to, and not being readily ascertainable through, proper means by the public.

Economic Espionage: The conscious and willful misappropriation of trade secrets with the knowledge or intent that the offense will benefit a foreign government, foreign instrumentality, or foreign agent. Misappropriation includes, but is not limited to, the following activities: stealing, copying, altering, destroying, transmitting, sending, receiving, buying, possessing, or conspiring to misappropriate trade secrets without authorization. Section 101(a) of the Economic Espionage Act of 1996 (EEA) criminalizes economic espionage.

Industrial Espionage, which is the conscious and willful misappropriation of trade secrets related to, or included in, a product that is produced for, or placed in, interstate or foreign commerce to the economic benefit of anyone other than the owner, with the knowledge or intent that the offense will injure the owner of that trade secret. Misappropriation includes, but is not limited to, the following activities: stealing, copying, altering, destroying, transmitting, sending, receiving, buying, possessing, or conspiring to misappropriate trade secrets without authorization. Industrial espionage is also criminalized under the EEA.

Export Control Violations

Transfer of dual-use equipment and technology, which includes unauthorized acquisition of restricted US dual-use items (having both military and civil applications) by countries or persons that might apply such items in ways that are inimical to US interests. These items include goods and technologies that might be related to the proliferation of weapons of mass destruction and their delivery and those that could

Page 41
Page 48 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

bolster the military capability and terrorist activity of certain countries. The Department of Commerce's (DOC) Bureau of Industry and Security is responsible for the regulation of exports for national security, foreign policy, and nonproliferation reasons and the enforcement of those regulations. The Federal Bureau of Investigation (FBI) and US Immigration and Customs Enforcement (ICE) maintain concurrent jurisdiction to enforce violations of these rules. According to the Code of Federal Regulations (28 CFR § 0.85(d)), the FBI is to take charge of the counterintelligence (CI) aspects of export cases. These organizations coordinate their investigative efforts to ensure that all prosecutorial options are maintained.

Transfer of defense items, which include unauthorized export of defense articles, defense services, and related technical data (collectively known as the US Munitions List). Munitions List items include arms and implements of war. The State Department's Directorate of Defense Trade Controls administers the International Traffic in Arms Regulations (ITAR), and ICE enforces violations of the Arms Export Control Act and ITAR. The State Department maintains a policy of denying exports of items on the Munitions List to proscribed countries. It should be noted that due to a recent ruling in favor of Bigelow Aerospace, the company is unique among aerospace companies in the United States as being currently exempt from several previously onerous ITAR requirements.

Foreign collectors continue to target a wide variety of unclassified and classified information and technologies in a range of sectors. According to the CI Community, which has the most detailed information on foreign collection efforts against dual-use, export-controlled, and military items, the most heavily targeted sectors across all agencies include aeronautics, information technologies, lasers, sensors, optics, and armaments and energetic materials. Targets also include the unique manufacturing processes and trade secrets used to produce technological

Page 42
Page 49 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

goods and services. As one can see, BAASS activities cover several of these highly targeted areas.

The methods employed by collectors remain as diverse as the collectors themselves. They include direct requests, solicitation and marketing of services, acquisition of technologies and companies, targeting at conferences or other open venues, exploitation of joint research and official visits, and targeting of US travelers overseas.

The United States remains the prime target for foreign economic collection and industrial espionage as a result of its worldwide technological and business leadership. Indeed, strong US international competitiveness underlies the continuing drive by foreign collectors to target US information and technology.

Analyzing the extent of the threat and tracking it are becoming increasingly difficult challenges. Globalization and the growth of multinational corporations blur the lines between foreign and domestic companies, encourage outsourcing of research and development, and lead to the establishment of foreign bases of operation, all of which present more opportunities for foreign entities to target US information and technologies and mask their collection activities.

Enduring Methods

The methods employed by collectors remain as diverse as the collectors. The methods most frequently reported by the Counterintelligence (CI) Community include:

Requests for information.

Solicitation and marketing of services.

Acquisition of technology and companies.

Official foreign visitors.

Page 43
Page 50 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Exploitation of joint research and contacts.

Conferences, conventions, trade shows.

Cyber attack and exploitation.

Foreign collection against US travelers overseas.

Requests for Information

Direct and indirect requests for information continue to top the list of methods most often reported by the CI community. These types of approaches often include requests for classified, sensitive, or export-controlled information that are not sought or encouraged by the target. Defense Security Service (DSS), 1843(a)(1)(a) and Army Counterintelligence Center (ACIC) all report that this technique is the method of choice for both government and non-government collectors.

ACIC numbers indicate that over 85 percent of targeting incidents involved direct requests in person or via e-mail, telephone, or fax.

DSS reporting shows that 26 percent of its targeting incidents fall under this category.

Solicitation or Marketing of Services

Foreign companies also seek entrée to US firms by pursuing business relationships that enable them to gain access to sensitive or classified information, technologies, or projects. For example, foreign businessmen submit unsolicited business proposals offering a variety of services such as product design, software, or engineering to US military facilities conducting work involving sensitive technologies.

Page 44
Page 51 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Acquisition of Technology

The direct and indirect acquisition of technology and information via third countries, the use of front companies, and the direct purchase of US firms or technologies are proven methods of acquisition that collectors continue to exploit, according to FY 2007 data. Countries with close ties to the United States that are subject to few US export restrictions often serve as prime locations for companies wishing to divert sensitive US technologies. Foreign collectors further disguise their activity by passing US technologies through fictitious companies, multiple layers of freight forwarders, multiple countries, or Free Trade Zones. They also commingle illicit and legal trade to obscure their activity.

Conferences, Conventions, and Trade Shows

These public venues are laden with opportunities for foreign collectors to interact with US experts and glean information regarding dual-use and sensitive technologies. DSS notes that collection in these open forums accounted for over four percent of reported suspicious incidents in FY 2007.

Official Foreign Visitors

Foreign government organizations, including intelligence and security services, also frequently target and collect information through official contacts and visits to the United States. These include visits to US military posts, armament-producing centers, and national laboratories.

One example of a local threat to the Greater Las Vegas area is the presence of the Department of Energy (DOE). The vast DOE presence here raises the threat level significantly. Not only is DOE a major target for foreign actors, the vast foreign visitation to DOE facilities is a significant factor. The following figure shows the number of foreign visitors to DOE facilities across the U.S. in FY07:

Page 45
Page 52 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Figure 1: Number of Foreign Visitors to DOE Facilities across the US in FY07

Exploitation of Joint Research

Increasingly, frontier research and development is the product of cooperative efforts between US and foreign experts. As noted in a recently released Department of Commerce-sponsored study, "Individual United States firms, along with their international competitors, are building global research enterprises. American universities are establishing campuses abroad, creating joint educational programs with foreign institutions, and partnering with foreign faculty in the conduct of cutting-edge research". DOE reports that scientific exchange is integral to research across the complex of its component laboratories. Although most government organizations and private-sector firms employ mitigation strategies to protect against illegal technology transfers and loss of trade secrets, the volume of joint research underway presents a prime targeting opportunity, either through human-to-human contact or via technical means.

Page 46
Page 53 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Targeted Information and Sectors

Foreign collectors continue to seek a wide range of unclassified and classified information and technologies. DSS found in FY 2007 that foreign collectors attempted to obtain information and technologies from each of the 20 categories on the Developing Sciences and Technologies List. The DSTL is a compendium of scientific and technological capabilities being developed worldwide that have the potential to significantly enhance or degrade US military capabilities in the future. Of particular interest were information systems, aeronautics, sensors, and lasers and optics, according to information amassed by the DSS. (See Figure 2 below)

In the same year, ACIC found that aeronautics systems, sensor technology, manufacturing and fabrication technology, and energy and power systems technology were the most frequently targeted by foreign entities. (see Figure 2 below)

1843(a)(1)(a)

The most heavily targeted sectors across all agencies include aeronautics, information technologies, lasers, sensors, and armaments and energetic materials.

Page 47
Page 54 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Figure 2: Heavily targeted Sectors Across all Agencies

BAASS Critical Program Information

Identifying CPI for BAASS, while challenging will not be impossible. One key element of this CISP will be to integrate Operational Security (OPSEC) and Communications Security (COMSEC) together with the identification of our CPI.

The BAASS mission being to identify and exploit technology discovered through the investigation of Unexplained Aerial Phenomenon (UAP) is directly impacted by the intelligence threat. Many of the technological areas illustrated in the above table have direct applicability to BAASS. These technological areas are heavily targeted by both State sponsored intelligence agencies as well as private enterprise.

Page 48
Page 55 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Additional Investigative Issues

Technical Training

BAASS conducts weekly technical training for investigators, researchers, and analysts. The training is designed to educate employees in specific areas of interest and train them on technical information associated with UAP activity. Technical training topics include: Aerodynamics, Conventional Aircraft Operations, Physiological and Pathological Effects, UAP Environmental Impacts, BAASS Data Warehouse, Radiation Physics, Radar Theory and Systems, Radar and UAP Investigations, Environmental Measurements, and Technologies and Physics of UAP. BAASS will continue to conduct training to enhance the professional development for all employees. Additionally, BAASS will continue to host select individuals who are subject matter experts or who have extensive experience on the topic. A highlight of this year occurred in April when [REDACTED] presented an eight hour lecture and discussion focused on his previous work investigating and studying various phenomena.

Reference Library

A reference library has been established and is continuously growing. The original NIDS library was reorganized to accommodate the new BAASS reference library. All the original NIDS books, periodicals, and references have been retained for future potential reference, while providing a space for growth of the new BAASS library. The new BAASS library includes reports previously not retained, updated technical references, new books on the UAP issue, and aerospace periodicals for research and investigative use. In addition, provision for the retention of BAASS physical files has been put in place. This will serve as a repository for physical files when it is not possible to be put into a digital format, and for back up to the digital case files in the Report Management System (RMS). As the RMS comes on-line the physical files will grow in accordance with the digitals files.

Page 49
Page 56 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®. SECTION 2: BAASS PROJECT/RESEARCH SUMMARY 2A BAASS INVESTIGATIONS Establishment of Purchase Agreement with MUFON In order for BAASS to best serve the sponsor it needs to become one of the central information sources on UAPs in the United States and around the world. Because BAASS has no publicity and deliberately maintains a low profile, it is essential to receive information from an external source on current UAPs that are occurring in real time in the United States until BAASS has sufficient internal capabilities to attract large numbers of case reports. One way for BAASS to achieve this goal is to contract with an organization that has hundreds of investigators already in place around the United States. The Mutual UFO Network (MUFON) is such an organization. MUFON has been in existence for four decades and currently has approximately 1000 volunteers who can investigate reports of UAP sightings in all 50 states. In February 2009, BAASS executed a Purchase order with MUFON that entitles BAASS to: (a) receive notification of significant reports on UAP sightings from anywhere in the United States within hours, (b) receive timely reports from MUFON investigators regarding investigations of these incidents (c) receive physical evidence (including photographs, digital recordings, samples of soil, insects, plants, and animals) for scientific analysis. BAASS has multiple laboratories that are ready to conduct forensic, photographic, metallurgic, chemical, isotopic, biological and chemical analysis of any specimens that BAASS receives from MUFON. As a result of the purchase agreement, MUFON enhanced their Star Impact Project (SIP) team comprised of over a dozen seasoned investigators. Members of
Page 57 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®. the SIP team are capable of being deployed to investigate cases anywhere in the United States. As a result of BAASS monthly stipends, MUFON enhanced their team of dispatchers, reorganized their chain of command for investigative cases and assigned Chief investigator 1843(a)(2) as the chief point of contact for BAASS. On average, MUFON receives, through its Internet Case Management System (CMS), about 400 reports of UAP activity per month, of which approximately 12 are deemed of sufficient interest to deploy their SIP investigators to. Through the terms of the Purchase agreement, BAASS has "Read Only" access to MUFON's CMS system, including, for those witnesses who agree, access to witness contact details. Beginning in March 2009, and throughout the purchase agreement period, BAASS and MUFON senior personnel have conducted weekly teleconferences during which logistical issues and problems are discussed and resolved. In addition to, and separate from, the BAASS-MUFON relationship, BAASS has already hired a small team of sixteen high quality top investigators with extensive intelligence and law enforcement investigative experience. These investigators are currently located in Las Vegas and are trained to deploy as "special forces" rapid reaction investigative teams that are deployable anywhere in the United States if BAASS determines that high value UAP cases warrant additional investigations. However this investigative group is still too small to cover the geographic area needed in both the United States and overseas. This team will need to be significantly enhanced during the second year of operations.
Page 58 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®. BAASS Case Summaries of Deployments to Date (July 23, 2009) 2A2a. Case: 090330-01 Date: March 18, 2009 Incident Type: CE4 Location: Lincoln City and Portland, Oregon On March 18, 2009 BAASS began an investigation into a report of UAP activity, primarily in the Lincoln City and the Portland, Oregon area. BAASS received the initial call from a female identified as 1843(a)(2) who with her husband 1843(a)(2) visited Lincoln City, Oregon in September of 2008. [REDACTED] 1843(a)(2) who is a journalist, informed BAASS that she was contacted by a local resident identified as 1843(a)(2) informing her about his experiences with the ongoing UAP activity in Oregon. 1843(a)(2) and husband [REDACTED] traveled to Lincoln City to 1843(a)(2) meet with [REDACTED]. According to 1843(a)(2) took them to a location in the forest where she and her husband saw something she could not explain. [REDACTED] 1843(a)(2) described the object as a "craft" and it to be grayish in color and have black octopus type legs. 1843(a)(2) stated the Craft was illuminated by a bright light, which allowed her to see that the craft had three tented windows. [REDACTED] described the 1843(a)(2) window shapes to be similar to skylights. On March 30, 2009 BAASS responded to Lincoln City and met with [REDACTED] 1843(a)(2) 1843(a)(2) [REDACTED] claimed he could lead BAASS to several locations where there was ongoing UAP activity. 1843(a)(2) claimed to have recorded evidence of the activity and could lead BAASS to additional witnesses. At 1843(a)(2) side was another witness identified as 1843(a)(2) who claims to have witnessed the same UAP activity. 1843(a)(2) brought with him a DVD containing footage, recorded by him, of an unidentified location where he and 1843(a)(2) recorded what appeared to be city lights and vehicles traveling on an unidentified roadway. At the
Page 59 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®. conclusion of the video BAASS spent several hours with both [REDACTED] and [REDACTED] 1843(a)(2) learning of their events and of additional witnesses later identified as 1843(a)(2) 1843(a)(2) and 1843(a)(2) of Portland, Oregon. Over the next four day 1843(a)(2) took BAASS to two locations where he considered there to be high levels of UAP activity. BAASS spent a considerable amount of time with the witnesses at the two locations without any reportable activity. BAASS also conducted an independent night surveillance at location one without any reportable activity. Location one was in Lincoln City and location two was in Portland, Oregon. Location 1, Lincoln City: 1843(a)(3) Weather/Terrain Conditions: Cold, Wind, Rain, and Muddy. This location is situated in the Siuslaw National Forest. Surrounding the location is several residential and mini ranch type dwellings. The location is heavily wooded and off a graveled packed maintained road. At the base of the location are several residential and mini ranch type dwellings to include 1843(a)(2) 1843(a)(2) residence, which is a single family dwelling with a separate garage structure behind the residence backing the hillside of the location. Location 2, Portland: 1843(a)(3) Weather/Terrain Conditions: Cold, Wind, Rain, and Muddy. This location is situated in the Mt. Hood National Forest. Surrounding the location is several residential and mini ranch type dwellings. The location is heavily wooded and off a graveled pack maintained road. To the west of the location are the Government Water Facility, Portland International Airport and several private airfields. About a ¼ of a mile west of the location is a residence, which according to 1843(a)(2) is
Page 60 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®. for sale and would be a perfect house for 1843(a)(2) to purchase to set up area surveillance. Conclusion: BAASS interviewed and re-interviewed several witnesses, which resulted in conflicting statements. 1843(a)(2) made several statements that he has been offered a lot of money from someone in Hollywood for his story. He also stated several times that BAASS could purchase property and equipment for both locations, so as he could continue with his investigations. While at location one, BAASS met and interviewed a local man later identified as 1843(a)(2), who lives at the base of the sighting area, and has lived 1843(a)(2) at his residence for the past 18 years. [REDACTED] stated he has never witnessed anything out of ordinary. BAASS also conducted night surveillance of the area and reported no activity. While at location two, BAASS set up surveillance and reported the only activity was that of the airplanes on approach to the Portland Airport, lights from vehicle, lights from residences scattered throughout the valley and some towers with red beacons fix to them in accordance to FAA guidelines, due to height. This location, according to 1843(a)(2) was considered to be extremely hot and the "grays" were very hostile. BAASS reports no such activity during the surveillance. BAASS concluded that 1843(a)(2) is consumed with the UFO Phenomena, so consumed that he believes the "aliens" transform themselves into light sources, moving vehicles, red beacons on top of towers and even commercial airliners with afterburners. 1843(a)(2) is also looking for someone to finance his investigation to include purchasing equipment and real estate to assist him in his efforts.
Page 61 ↗
2A2b.
Case: 90415-04
Date: April 15, 2009
Incident Type: CE5
Location: Trout Lake and surrounding area to include Yakama Indian reservation

In fulfillment of a direct request from the DIA, on May 15 – 17, 2009 BAASS Field Investigators attended "Field Trip #4" hosted by Paranormal Research Society (PRS) at the Sattva Ranch in Trout Lake, Washington. The Investigator's did not attend the events as BAASS Investigators, instead they went as 3 curious people that wanted to witness UFO's, learn about paranormal activity and be around other people with similar interests and experiences.

PRS is a TV show on A&E which investigates paranormal activity, such as haunted houses and exorcists. Between 90 and 100 attendees showed up for the 3 day event with high hopes of learning about recent paranormal investigations and to witness UFO's and orbs. Throughout the day attendees would gather in the conference center or other rooms to listen to presentations or attend some type of meditation classes. These events lasted until approximately 2100 hours.

The Sattva Ranch is owned and operated by [REDACTED] "[REDACTED] is an author, teacher, ufologist, spiritual counselor, energetic healer, and the founder of the Enlightened Contact with Extraterrestrial Intelligence (www.eceti.com) .The property is 70 acres and approximately 13 miles south of the southern face of Mt. Adams [REDACTED] claims his property attracts UFO's, orbs, has a portal to another dimension and wild creatures known as "batsquatch" can be found in the woods. [REDACTED] also claims that UFO's and UAP's can be seen from his ranch on a regular basis. At 2200 hours the majority of the PRS cast, attendees and other people gathered at the "skywatch" field in
Page 62 ↗
preparation to view the crafts. [REDACTED] was outside as well and set up his high power camera and monitor. This monitor was set up in a way so all the attendees could see what he would be focusing on.

For the next two nights starting at 2200 hours the investigator's witnessed numerous high flying objects that [REDACTED] identified as alien spacecraft. Several of the attendees appeared to agree with all that [REDACTED] was claiming to have seen even when they were looking at a different object.

Investigators interviewed numerous witnesses (all of whom are listed on the detailed report), reviewed investigative procedures as needed. Investigators took numerous still photographs of the property, attendees and events, as well, they video recorded several events, including the UFO watching and presentations by PRS. GPS coordinates were recorded for future reference.

The event started with a group introduction of the PRS crew and [REDACTED] [REDACTED] speaking on the daily craft sightings and overall power of the ranch to attract extraterrestrial crafts and energies. [REDACTED] advised us that UFO sightings usually took place at night around 2200 hours. Approximately 30 UFO's were witnessed each night, but unknown if any of these were extraterrestrial.

INVESTIGATIVE ANALYSIS: During this trip numerous unidentified flying objects were witnessed by all three Investigators. Even with the use of night vision and thermal imagers the Investigators could not make a positive identification of the objects. It is the Investigators belief, which is based on their training and experience, the witnessed objects can be explained as satellites, commercial and/or military aircraft. Upon return to BAASS, Investigators researched satellite tracking via the internet and learned that Satellites, Genesis I and Genesis II, belonging to Bigelow Aerospace may have flown over Trout Lake, WA (Sattva Ranch) on these days. In addition, Investigators contacted Bigelow Aerospace Mission Control to confirm the information. This information showed Genesis I and Genesis II had flown directly over our location during the same dates and times the events were taking place.
Page 63 ↗
This ranch is in the vicinity of the Yakima firing range, Hanford nuclear facility and directly within a military training flight path. An additional visit may be necessary to identify the crafts. Some type of high power binocular or telescope would greatly assist in this.

It should be noted that several of the attendees participated in the usage of some type of hallucinogenic substance during the séances. This was witnessed and verified by an Investigator. The same people who used the substances claimed to observe the crafts making moves, turns and altitude changes that we did not witness.
Page 64 ↗
2A2c.
Case: 090428-1
Date: April 28, 2009
Incident Type: CE1 (with possible landing)
Location: Maricopa AZ (Ak-Chin Indian Reservation)
Witnesses:
1. [REDACTED]
2. [REDACTED]
3. [REDACTED]

Additional flight training information gained from: [REDACTED] (Marine Corps Air Station Community Planning & Liaison) by telephone contact.

On May 05, 2009, BAASS Investigators drove to Phoenix AZ to meet with witnesses in reference to strange lights and a possible landing of a craft near the Ak-Chin Indian Reservation. Witnesses state that on April 28, 2009, they saw strange amber colored lights over Estrella Mountain, which is just south of Phoenix. One witness stated that he saw the lights go over his house, and possibly land or get very close to the ground on reservation.

The first witness contacted was [REDACTED] [REDACTED] states that as she was walking home from the grocery store (in Glendale AZ), she noticed 3 amber colored lights over Estrella Mountain. The mountain is several miles south of Glendale, but easily visible and a landmark for local residents. She stated that the lights were stationary for several minutes, but then went behind the mountain. As she is familiar with the area, she said she believes she lost sight of them when they were near the Ak-Chin Reservation.
Page 65 ↗
The second witness, [REDACTED], noticed the lights at approximately the same time. He stated that the lights would vary in intensity, and that he originally saw them at an angle of 25 to 30 degrees above the horizon. After a few minutes, the lights lowered to an angle of 5 to 10 degrees, and he decided to drive around in his truck to see if he could get a better view. He saw the lights in what he believed to be a large field about 1 mile behind the Ak-Chin Indian Casino, on reservation land. [REDACTED] describes the lights as being at ground level, about 100 yards apart, and the flashing as if lights from an emergency vehicle. [REDACTED] was unable to go onto Reservation land, and simply went home at this point.

Investigators did make contact with the Ak-Chin Tribal Police Department, and [REDACTED] was interviewed. He stated that no reports of any lights were reported to his department. He further stated that if we could get a more exact location of where the lights were witnessed there was a possibility of being escorted to the area.
Page 66 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
2A2d.
Case: 090428-2
Date: April 09, 2009
Incident Type: MA1
Location: Lake Havasu City, AZ

On Saturday May 9, 2009, BAASS Investigators met with 1843(a)(2) to discuss his sightings of UAP's on March 13 and 18 of this year. 1843(a)(2) states that he didn't actually witness anything on the 13th, but merely reported an event witnessed by two co-workers. They described seeing an elongated craft with glowing amber lights about 600' high over a local golf course. They also noted that there was a "twinkling" or "ember like" trickling down from the lighted portion of the craft. 1843(a)(2) stated he went to the area about 10 minutes after his co-workers told him about it, and even talked to a golf course employee, but did not see anything. 1843(a)(2) was going to have his co-workers submit a written statement to BAASS Investigators, but even after repeated calls, this never happened.

1843(a)(2) states his sighting on the 18th was witnessed by at least 7 others, but as of this writing has not supplied the witness information to BAASS Investigators. He described seeing the object 3 different times during the evening, and showed me a video of the craft. BAASS Investigators found the video to be inconclusive, and 1843(a)(2) never sent a copy for further analysis.

The object sighted was described as having several amber lights on the bottom that were in the shape of an oval. He stated that the object made a 90 degree turn, but did not bank as a conventional aircraft would, but instead appeared to turn as a car would. 1843(a)(2) states that he is quite familiar with military aircraft, and that the craft he saw on the 18th was not familiar to him. He did note on his first sighting of the evening, there were two F15 jets in the area.
Page 67 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

BAASS investigators made an inquiry to the Marine Corps Air Station in Yuma, AZ, to see if any training flights may have been scheduled on the 18th. BAASS was informed that while nothing should have been over Lake Havasu City, training missions were conducted over Arizona at that time, and that it is not improbable for over flights.
Page 68 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
2A2e.
Case: 090518-1
Date: May 18, 2009
Incident Type:
Location: Buffalo, AZ

On Tuesday, June 09, 2009, BAASS Investigators responded to Buffalo Oklahoma to investigate the possible landing or low hovering of an unknown object. Initial report information was provided to BAASS by MUFON, and is their case #17125.

The witness, 1843(a)(2) stated that she was feeding her horses at 0030 on May 18, 2009, when she noticed several strange lights in the sky. Upon stopping her work and watching the lights, she noticed that a white light floated to the ground, and either landed or was hovering just above the ground on the far side of the corral. She stated that the light was very bright, made no noise, and she was unable to see if there was any sort of structure associated with the light. After watching the light for several seconds, the witness became afraid and left the area in her truck. Of note, said corral is not located close to the Witnesses place of residence.

Upon looking at the area where this event occurred, we determined that the light was approximately 100 feet north of where the witness was standing. As 1843(a)(2) showed us the exact spot, she said that when she came to the spot and looked in the daylight, she thought at first the areas of flattened grass looked like deer beds. Samples of the grass and dirt of both the supposed landing site and surrounding area as control samples were taken by BAASS Investigators.

During the time spent with 1843(a)(2) she seemed sincere about this sighting, and her story never varied. When asked about the event in different contexts, the answers were always the same. The witness credibility for this event is good. During the course of our investigation, we learned that at one
Page 69 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

time, she was [REDACTED] and that she was a good employee and never showed signs of being other than a normal, functioning adult.

Local residences were interviewed in an attempt to corroborate witness story, unfortunately no other persons witnessed the event. The evidence that was collected will be analyzed by BAASS scientists in the near term as analysis equipment arrives.
Page 70 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
2A2f.
Case: 090527-3
Date: June 9, 2009
Incident Type: CE3
Location: Marathon, TX
FINAL REPORT (with follow-on Supplement)
NOTE: SINCE THIS MULTIPLE WITNESS DAYLIGHT CASE REMAINED WITHOUT EXPLANATION AFTER THE INVESTIGATION AND BOTH WITNESSES WERE DEEMED RELIABLE, THE ENTIRE REPORT IS BEING INCLUDED.
REPORTING PARTIES/WITNESSES
1843(a)(2)

WITNESS STATEMENT

On Tuesday, June 09, 2009 at approx. 9:30 p.m. BAASS investigators conducted an interview with 1843(a)(2), one of the reporting parties in this case. Investigators conducted an interview with 1843(a)(2), the other witness involved in this case.

Both interviews were conducted at the same time at the IHOP restaurant in Houston, TX. In reference to this case, 1843(a)(2) stated essentially the following:

My friend, 1843(a)(2) and I were driving up to Big Bend State Park and we were near Marathon, TX when this thing happened. I was driving and we had the radio on and a/c was running. As I was driving along on hwy. 385 southbound, I
Page 71 ↗
saw a shadow fly over the hood of the car. I thought it was just a bird flying over the car. Almost immediately after the shadow flew over, I saw something out of my peripheral vision to my right. It looked like a huge extremely bright white light. We were in the desert and it was around 12 noon, not a cloud in the sky, and this thing was really bright. It was coming straight toward the car on the passenger side. It first put me in mind of a train with a large headlight or maybe a motorcycle with an extremely large headlight. There are no train tracks out there and this wasn't a motorcycle though.

Anyway, this thing came at us and right before it hit the car, I could see something that looked like arms waving. I don't think they were arms waving, that's just what it looked like. There was no sound and I couldn't make out a distinct shape. It hit the car and came inside for I don't really know how long. We had the windows up but this thing came inside and then you couldn't hear anything, not the radio, not the a/c or anything. I couldn't see anything either. It was like you held a piece of white paper up to you (sic) face and covered you (sic) eyes with it. Everything was just white. I couldn't see [REDACTED] either and I was looking in the direction of the passenger window. After what seemed like a few seconds, and I can't be sure how long it was, the light left the car out the driver's side. I noticed the cross I had hung on the rearview mirror was swinging back and forth so I reached up and grabbed it to stop it. I said to [REDACTED] 'Why are we doing this?" I looked to the left but didn't see anything [REDACTED] said "What the hell just happened?"
Page 72 ↗
There was no damage to the car and we had no injuries from this thing. It was weird though that the light was so bright and I didn't have vision spotting like you would have when you look at a very bright light.

I had been driving around three to four hours and wasn't really tired. I wasn't on medication and we weren't drinking or on drugs. This was a long and empty road and we didn't see any other traffic. There were a couple of weird things about this day. About half hour before this happened; I stopped to take pictures of some prairie dogs along the side of the road. When I was out of the car starting to take the pictures, for some reason, I started feeling very weird and uneasy so I got back in the car without taking any pictures of the dogs. I can't explain why I decided not to take the pictures even though I was out on the road, no one else around with camera in hand. I just felt threatened from something other than the prairie dogs.

Then, when we got to the campground after this happened, we saw a guy in a heavy motorcycle type jumpsuit, riding a newer BMX type motorcycle and he was talking on a black and yellow cell phone. The thing is there was absolutely no cell phone coverage in the area. We don't know how he was talking on that cell phone. He had a really small tent and was alone. We thought it was strange he would come all the way up here alone. The next morning when we got up he was gone. We didn't hear him leave.

After [REDACTED] recounted the incident, a series of questions were asked regarding physiological effects the parties may have experienced regarding the event, before, during, or after. [REDACTED] reported only that during the event, he felt cool and not free to get up or move on his own. He felt no effects before or after the event. [REDACTED] advised the vehicle he was driving was rented from Hertz car rental at Hobby airport.

1843(a)(2) GENERAL HEALTH OF [REDACTED]: [REDACTED] stated that he has been in great physical condition lately has been more tired than usual but he attributes this to
Page 73 ↗
working longer hours and not necessarily from the event. [REDACTED] stated that the night before the incident, he had a good night's sleep and felt well rested and in good physical condition.

1843(a)(2) [REDACTED] advised he did not drink any alcohol on the day before or the day of the incident. He further denies the use of any illegal narcotics, and is not taking any prescription medication.

PHYSICAL AND BODILY EFFECTS ON [REDACTED]. The following questions were asked of [REDACTED].

1. Think carefully and please describe any physical or bodily effects in the 15-30 minutes prior to the event.

[REDACTED] stated he recalls nothing unusual prior to the incident except the uneasy feeling he got when he got out to take pictures of the prairie dogs.

2. Think carefully and please describe any physical or bodily effects during the event, including when the light was in the car.

[REDACTED] reported only that during the event, he felt cool and not free to get up or move on his own. He remembers not being able to see anything other than a very bright white light, nor hear anything including the radio or a/c.

3. Think carefully and please describe any physical or bodily effects in the 30 minutes after the event.

When the light left the vehicle, [REDACTED] stated he felt threatened by it and then mad because "I felt like someone or something was doing this to us."

4. Describe any physical symptoms in the hours and days after the event.
Page 74 ↗
[REDACTED] stated he has been more tired lately but thinks it has more to do with his job than the event.

VEHICLE INVOLVED: [REDACTED] stated they were driving a 2008 Nissan Rogue, black, 4 dr., which they had rented from Hertz. No identifying information was available for the rental car.

DESCRIPTION OF OBJECT/LIGHT: [REDACTED] advised he could not provide a good description of the light other than extremely bright and white. It had what could be described as arms waving as it approached the vehicle.

EVIDENCE: On Tuesday, June 9, 2009 at approx 11:00p.m, at the IHOP restaurant located at 2515 Southwest Fwy. Houston, TX, [REDACTED] was asked to provide samples of his fingernails. [REDACTED] provided investigators with samples of all his fingernails.

These fingernail samples were collected into vials by [REDACTED] and marked as evidence.

Also provided by [REDACTED] were photos from Google Earth showing the approximate location of the occurrence and copies of receipts which shows a timeline of when they were in the area. These last two items will be included in this case file.

ID Data:

[REDACTED]

Additional information:
Page 75 ↗
The parties provided photos of the general area where they believed this incident occurred, however they were not able to pinpoint the exact location. The best they could do is say they were traveling on Hwy. 385 southbound approx. 50 miles south of Marathon, TX. If that is correct, according to Google earth, the roadway in that is between 2700 and 2900 feet in elevation. It should be noted that this area does have low level military training routes and is close to Marfa, TX. When questioned about these items, [REDACTED] insisted these were not involved in this incident as he is familiar with military aircraft and this was not what this was. Also the Marfa lights only appear at night and this was around noon on a clear day.

The 3 (Figures 3-5) photographs on the following pages are provided by [REDACTED] and are of the approximate location of the occurrence.
Page 76 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®. Figure 3: Incident location, Marathon TX Page 70
Page 77 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®. Figure 4: Incident location, Marathon, TX Page 71
Page 78 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®. Figure 5: Incident location, Marathon, TX Page 72
Page 79 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®. CASE": 090527-3 (Marathon, TX) Supplemental Report WITNESS [REDACTED] WITNESS STATEMENT 1843(a)(2) On 6-9-09, 2100 hrs., writer interviewed [REDACTED] at an IHOP restaurant located at 2515 Southwest Fwy., Houston, TX. [REDACTED] declined to have his statement recorded, but agreed to a verbal statement. [REDACTED] related that on 4-22-09, prior to 1239 hrs. (CST), he was the passenger in a vehicle that was being driven by his friend [REDACTED]. They were travelling southbound on Hwy. 385 in the area of Marathon, TX. They were headed to Big Bend State Park to do some camping. About 15 minutes prior to the incident, they had observed a prairie dog sticking out of a hole in the middle of the road. [REDACTED] is into photography and they decided to pull off the road to take pictures. As they watched the prairie dogs on the side of the road, [REDACTED] prepared to take some pictures. [REDACTED] decided not to take pictures, and told him to get back into the car so they could leave. [REDACTED] thought that this was unusual for [REDACTED] not to take pictures, but got back into the car and they continued on. [REDACTED] stated that he was looking at the scenery to his right, when in his peripheral he saw what appeared to be a bright light, with some sort of mass under it. This light was about 300 yds. away from them, and coming at about a 45
Page 80 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®. degree angle to the vehicle. Because this light had an appearance of a bicyclist type helmet, his first thought was 'what is a bicyclist doing way out here'. He watched the object and at about 150 yds., it appeared to 'condense' itself, similar to a bicyclist 'crouching down' to gain speed, the light also got brighter. Within seconds, the light hit the vehicle in the area of the right front fender/wheel area, and though there was no sound to the impact, he felt the car "rock back and forth". The interior of the vehicle became very bright, like a solid white color. He has no idea how long the light was within the vehicle, but remembers that he could not hear anything. He also could not see anything in or out of the vehicle. 1843(a)(2) He could not even see [REDACTED] he just saw white. The light then disappeared from the vehicle, and he looked over to [REDACTED] looked very pale and had small beads of sweat about his forehead. [REDACTED] asked "Why are we doing this?", and he responded by saying "What the hell just happened?". [REDACTED] also stated that [REDACTED] had a cross hanging from the interior vehicle mirror, and this cross was now moving in a circular-like motion. As they drove on, [REDACTED] related that he looked out of the window to try and see if there was any damage to the vehicle, and he observed none. When they finally decided to pull over at a gas station, he again checked the vehicle and saw no damages. [REDACTED] remembers that right after the incident, he noted the time on the car clock as 12:39 p.m. When they stopped at the gas station, he noted that the time on the receipt showed 3:14 p.m. He can't explain exactly why he feels this, but he thinks he may have lost about 1 hour of time. He feels that from the location of the incident, to where the gas station was, should only have been about 1 ½hr.sdrive. But, he can't be sure. [REDACTED] said that after reaching their destination, Chisos Basin Campground, they set up their camp. Later, a male on a motorcycle came up to them and Page 74
Page 81 ↗
1843(a)(2) started talking. [REDACTED] thought this was 'odd', and it seemed that the male was almost 'forcing' a conversation with them, asking things like who they were, and where they came from. This male later set up a small tent not far from them. [REDACTED]1843(a)(2) stated that he later saw the male talking on what he believed to be a cell 1843(a)(2) phone. He could hear the male talking, but does not know what was being said. He again felt this was strange, as earlier, both [REDACTED] and [REDACTED] had tried to check their cell phones, but had no signal. The next morning, they noticed the motorcycle rider was gone, though they did not hear the motorcycle leave. 1843(a)(2) 1843(a)(2) "GENERAL HEALTH OF[REDACTED]: [REDACTED] stated that he has been wearing contact lenses for a stigmatism. He has been wearing them for the last four years. At the time of the incident, he was not wearing his contacts. [REDACTED] stated that he feels that he is a little hard of hearing. Though he has not gone to a doctor for evaluation, he often finds himself asking people to repeat themselves. Note: During the interview, 1843(a)(2) never asked writer to repeat himself or to speak louder. 1843(a)(2) [REDACTED] said that the night before the incident, he had a good night's sleep and felt well rested and in good physical condition. He denies the usage of any alcohol on the day before or the day of the incident. He further denies the use of any illegal narcotics, and is not taking any prescription medication. PHYSICAL AND BODILY EFFECTS ON [REDACTED] [REDACTED] was asked to think carefully and please describe any physical or bodily effects in the 15-30 minutes prior to the event. [REDACTED] stated he recalls nothing unusual prior to the incident.
Page 82 ↗
1843(a)(2) [REDACTED] was asked to think carefully and please describe any physical or bodily effects during the event, including when the light was in the car. Literally, just seconds before the light impacted the vehicle, [REDACTED] stated 1843(a)(2) he became fearful, as he knew the light was going to collide with them. While the light was in the car, he recalls having no emotions, and the loss of hearing. He remembers not being able to see anything other than a very bright white light. 1843(a)(2) [REDACTED] was asked to think carefully and please describe any physical or bodily effects in the 30 minutes after the event. When the light left the 1843(a)(2) vehicle, [REDACTED] stated that he could feel his heart was 'racing' and that he felt clammy. He also had 'goose bumps'. He felt extremely relieved, knowing that whatever the light was, it was now gone. He also felt it unusual that the light being so bright, there were no 'spots before his eyes', after the incident. 1843(a)(2) [REDACTED] was asked to describe any physical symptoms in the hours and days after the event. 1843(a)(2) [REDACTED] stated that after the incident, up until about one week after 4-27-09, every time they would talk about the incident, he would have a lot of anxiety. He can't explain all the feelings, but stated that he would get real 'worked up' about 1843(a)(2) the whole incident. [REDACTED] stated that the best way he could describe the feeling was that he felt he 'needed to just stop talking about it'. [REDACTED] also said the he was a little more 'moody' during that time also. 1843(a)(2) VEHICLE INVOLVED: [REDACTED] related that at the time of the incident, he was in a 2008 Nissan Rogue, black, 4 dr., which they had rented from Hertz. [REDACTED] does not recall the license plate number of the vehicle.
Page 83 ↗
1843(a)(2) [REDACTED] further stated that at the time of the incident, the windows were up and the A/C was on. He also said that the car radio was on, and that they were listening to a David Bowie song through his Ipod, hooked up to the car radio. The music was not real loud, but louder then 'normal'. 1843(a)(2) DESCRIPTION OF OBJECT/LIGHT: [REDACTED] described the object as white and shiny. He said it resembled a bicyclist-type helmet, or the shape of a motorcycle gas tank, and its size similar. It was like flat on the bottom with a rounded top. Through the middle of the object (front to back), he recalls seeing a silver 'line' 1843(a)(2) 1843(a)(2) almost like mercury. Writer asked [REDACTED] what he meant, and [REDACTED] stated that it seemed 'fluid' like how mercury is. The back of the object, appeared to have 'like streams of lights' coming from it, and under it, was just very bright white light. The white light seemed to have extended all the way to the ground. 1843(a)(2) [REDACTED] said that he heard no noise coming from the object. He further related that as the object neared the vehicle, it 'condensed'. Writer asked [REDACTED] 1843(a)(2) 1843(a)(2) to elaborate on that, and [REDACTED] said it was like how a bicyclist would 'hunch down' to gain momentum or speed. 1843(a)(2) EVIDENCE: [REDACTED] was asked if he would voluntarily give writer samples of 1843(a)(2) 1843(a)(2) his fingernails, and [REDACTED] replied that he would 'if he had any'. [REDACTED] stated that he has always been a 'nail biter'. This was visually confirmed by writer, that [REDACTED] had no length to his fingernails. 1843(a)(2) On 6-9-09, 2300 hrs., at the IHOP restaurant located at 2515 Southwest Fwy., [REDACTED] was asked by this writer, if he would agree to give samples of his fingernails. [REDACTED] responded that he would give samples, and this was witnessed an Investigator. [REDACTED] then clipped each of his fingernails one at a time, catching same onto a white piece of paper. Vials were provided to [REDACTED], who then placed each sample into an individual vial, which was then sealed by this writer. Each
Page 84 ↗
vial was then marked, so as to indicate which finger the sample was obtained from. On 6-15-09, writer completed an Evidence Report. CASE : 090527-3 DATE OPENED : 4-22-09 [Drawing] 1843(a)(2) Figure 6: [REDACTED] provided the above drawing of the object he saw.
Page 85 ↗
2A2g. CASE: 090602-1 Date: May 29, 2009 Incident Type: CE1 Location: Liberty County, Texas SYNOPSIS: On 5-29-09, approx. 2020 hrs., a commercial airlines had just departed Bush Intercontinental Airport out of Houston, Texas. This flight was bound for South Carolina. Pilot of the aircraft reported to the Control Tower, that at around 11,000 feet, an object had passed within 150 feet of the craft. Aircraft was above the Liberty County area at the time. On 5-30-09, two witnesses in the Liberty County area reported seeing the incident to the Liberty County Sheriff's Office. CONTACT WITH FAA: On 6-3-09, 1335 hrs., writer made telephone contact with the FAA office 1843(a)(2). All questions regarding this incident was being referred to the Liberty County Sheriff's Office. FAA is one of the Agencies looking into this matter and any request for reports from the FAA, would have to be requested through FOIA. At this time, because it is a 'active' investigation, copies of reports or other information, is not being released. OTHER AGENCIES INVOLVED WITH INVESTIGATION: It was learned that the F.B.I. and Homeland Security are also involved in this investigation. Writer has made no attempt to contact these Agencies. MEETING WITH LIBERTY COUNTY SHERIFFS OFFICE: On 6-10-09, 1100 hrs., writer met with 1843(a)(2) of the Liberty County Sheriff's Office. 1843(a)(2) [REDACTED] related that because this is an 'active' criminal investigation, no copies of their reports would be released, this included the names of witnesses or other 1843(a)(2) parties involved. However, [REDACTED] was able to release certain information.
Page 86 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

SUMMARY OF INFORMATION OBTAINED FROM 1843(a)(2)

1. Similar incident occurred in May of 2008, involving a Continental Airlines flight. That case is also 'active', and no copies of reports are being released.

2. In the May 2009 incident, [REDACTED] is fairly confident, that the 'object' was in-fact a rocket, as described by the Pilot of the aircraft. [REDACTED] also related that there was no apparent 'system guidance' for the rocket.

3. Incident, though reported to Liberty County Sheriff's Office, actually occurred over Chambers, Texas.

4. There is one Rocketry Club in Liberty County, however, their 'launch site' is located behind and away from the flight path of the aircraft.

5. To date, no launch site has been determined, and no retrieval of the rocket has been made.

Page 80
Page 87 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

BAASS Investigations of Two Cases Involving US Military

The following two cases, labeled "Tic tac" and "Lakenheath", in addition to the descriptions of the BAASS deployments cited above, are examples of cases involving the interactions between United States military pilots and advanced aerospace vehicles. When initially investigated, both cases were deemed of potential national security interest.

BAASS Investigation Tic-Tac

The following preliminary report of unusual incidents in late 2004 is summarized by BAASS Lead Program Manager 1843(a)(2) who was Commanding Officer of VMFA-232 at the time of the incident. This incident is considered a sentinel case for BAASS in that it directly intersects national security issues; the case is being exhaustively and aggressively investigated by a team of BAASS collaborators, located on the East Coast. A full report on this investigation will be forthcoming.

Report on Events Occurring in SOCAL Operating Area, November-December 2004

This report summarizes unknown aerial phenomenon incidents that occurred in the SOCAL Operating Area southwest of San Diego, CA during November and/or December 2004. Exact dates are unknown. The details in this report are from my recollection and from a telephonic discussion with the pilot of the lead aircraft, 1843(a)(2) who visually observed the unidentified aerial object.

I was Commanding Officer of VMFA-232 – the Red Devils. VMFA-232 was an F/A-18C squadron and the only U.S. Marine Corps squadron assigned to Carrier Air Wing 11 (CVW-11). The other squadrons assigned to CVW-11 were VFA-14 (F/A-18E), VFA-41 (F/A-18F), VFA-94 (F/A-18C), VAQ-135 (EA-6B), VAW-117 (E-2C),

Page 81
Page 88 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

HS-6 (H-60), and VRC-30 Det 3 (C-2A). CVW-11 was assigned to Carrier Strike Group 11 (CSG-11) – the USS Nimitz Strike Group. The ships that were part of CSG-11 were the USS Nimitz (CVN-68, nuclear aircraft carrier), USS Princeton (CG-59, Guided Missile Cruiser), USS Chafee (DDG-90, Destroyer), USS Higgins (DDG-76, Destroyer), and USS Louisville (SSN-724, Los Angeles-class nuclear submarine). I am not sure if all of the ships listed above participated in the at-sea training period in which the events below transpired. I know the Nimitz and Princeton participated, and believe the Chaffee was also at sea.

During the last few months of 2004 and the first months of 2005, CVW-11 and the Nimitz Strike Group were preparing for an upcoming deployment to the Arabian Sea. The Strike Group trained in the military operating area off the coast of Southern California on multiple occasions. The events of interest took place in November and/or December 2004. According to my flight log book, and my memory of the type mission I was flying, I believe the events occurred on November 12, November 14, or December 8, 2004. 1843(a)(2) believes that the visual sighting occurred in December 2004.

I was flying a single-seat F/A-18C that launched from the USS Nimitz around 10:30 a.m. local time (daylight). I was flying without any wingmen as the purpose was to execute several checks of the aircraft after it had undergone some significant maintenance. The day was a beautiful day for flying – no clouds and unlimited visibility. After about 30 minutes airborne, I received a radio call from my controller (no other aircraft operating on my frequency) asking me if I could investigate an unidentified airborne contact. [Note: It was not abnormal to receive requests or direction to investigate either unidentified airborne or surface contacts.] I informed them that I could after the completion of my current check. The controller subsequently gave me a vector to the southeast for approximately 30-40 miles. [The reference point for the incident was approximately North 31 degrees 20 minutes, West 117 degrees 10 minutes with an error radius 30 nautical miles to the west or 10 nautical miles to the east. The reference point is about 70nm south of the U.S.-Mexico border, and 30nm off the Baja (Mexico) coast. I could see the coastline as I was being vectored southeast.] I proceeded

Page 82
Page 89 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

southeast at maximum conserve speed (250 Kts indicated or approximately 400 Kts ground speed) at medium altitude (15,000-25,000 ft). The controller asked me if I had any ordnance onboard, and I replied that I did not. I thought this was very odd since no controller had ever asked me this during a situation of identifying an unknown contact in U.S. or international territory. The controller informed me that the unidentified contact was at slow speed and low altitude – near the surface. About 25 miles away from the reference point, I gained radar contact of what I believe to be two F/A-18Fs that were approaching the reference point from the west at low altitude (500-5,000 ft). I did not observe any other traffic on radar. The controller informed me to remain above 10,000 ft as there was other fighter traffic at low altitude investigating the unidentified contact. As I approached approximately 15 nm from the reference point, descending through approximately 15,000 ft, I could see a rather large disturbance in the ocean surface. I remember the seas surprisingly calm that day with rolling swells, but no surface waves. At first I did not associate the disturbance with the unidentified contact, but subsequently correlated the position of the ocean disturbance with the location of the two radar contacts that were maneuvering at the same location. When I was about 5-10 nm away from the reference point, my controller told me to "skip it" and return to my operating area. ["Skip it" is a communications brevity term to cease executing the assigned mission.] Since I was close, I elected to fly over the disturbance and see what was causing it. The ocean disturbance appeared to be between 50-100 meters in diameter and close to round. It was the only area that any type of whitewater activity could be seen and it reminded me of images of something rapidly submerging from the surface. Like a submarine or a ship sinking. It also looked like a possible area of shoal water – where the swell was breaking over a barely submerged reef/island. I overflew the disturbance and then turned back to the northwest. As I was flying away, I could see the disturbance clearing and I could no longer identify the place where it occurred. I did not see any object or vessel associated with the disturbance – above the surface, on the surface, or below the surface. I also never made visual contact with the other fighter aircraft that were vectored to

Page 83
Page 90 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

the location or the unidentified contact. I returned to my operating area and loitered until recovering back aboard the USS Nimitz around noon local.

Note: I believe my controller was physically operating from the USS Nimitz, but may have been on any of the ships. I am not sure, but assume the controller saw the unidentified contact on his radar screen. I never spoke to any controller again regarding this event.

After landing, I removed my flight gear and reported to CVIC (the carrier intelligence center). [This was standard operating procedure even during routine training during carrier operations. Aircrew would provide intelligence personnel with reports of what they did during their mission to allow the intelligence personnel to train on taking pilot reports and subsequently writing reports.] As soon as I arrived in CVIC, my Intelligence Officer, 1843(a)(2) (assigned to CVIC while deployed at sea) asked me if I saw "the supersonic Tic Tac?" As I told him I didn't know what he was talking about, he then took my post-mission report. I told him about the vector to the unidentified contact, the disturbance in the water, and other unrelated events during the flight. He then told me that two F/A-18Fs (two-seat Super Hornets) from VFA-41 observed the unidentified contact and reported it as a "supersonic Tic Tac- looking" object. He said that the other ships' radars (USS Princeton and possibly others) had been observing an unidentified radar contact in approximately the same location at the same time for several days. But since we had been conducting afternoon and night flying the previous week, they did not have any aircraft to investigate the unidentified contact.

At that time 1843(a)(2) Commanding Officer of VFA-41 came into the area of CVIC that my Intel Officer and I were in. I asked him who was out there that saw the object. He told me that it was him leading a two-ship and he proceeded to tell me the following story. [The following details are supplemented by information provided by 1843(a)(2) during a phone conversation on January 6, 2009.] He said they were airborne conducting 2v2 intercepts when he received vectors for an unidentified airborne contact and was told to investigate. As the

Page 84
Page 91 ↗
two-ship of F/A-18Fs proceeded toward the contact,[1843(a)(2)] observed a disturbance in the water around the location they were being vectored to. As his flight descended to low altitude (5,000 ft to 500 ft.) and approached the disturbance, he visually observed an object unlike any airborne object he had seen before. He asked his Weapon Sensor Officer if he saw the object, and the response was yes. He detached his wingman (2nd F/A-18 in the formation) to a high cover/trail position. Subsequent radio communication confirmed that both aircrew in the wing aircraft visually observed the object also. The object was described as the shape of a "Tic Tac" breath mint candy. The object appeared to be about the same size as an AV-8B aircraft – 46 ft. in length – and proportional like a "Tic Tac." The object did not appear to have any aerodynamic surfaces – it looked smooth. The object was observed at ranges from approximately one to three nautical miles. [1843(a)(2)] two-ship did not gain a radar or sensor track on the object, nor did they attempt to once they saw the object visually. Additionally,[1843(a)(2)] and the other aircrew were not recording their "Helmet Targeting System" when the object was observed. Targeting System" when the object was observed.

As they first saw it, the object was either on the surface of the ocean or just above the surface. As he approached the object, he started a turn to orbit the area. He said as he got closer, the object appeared to hover just above the surface of the ocean. Then it climbed to co-altitude with them as they started their turn. It appeared to turn with them and maintain exactly opposite their "turn circle" for approximately 180 degrees of turn. Then the object accelerated, climbed and departed away from them at acceleration rates that he could not conceive. He stated the object was doing at least 600 knots shortly after it started climbing away from them. His impression was that the object was definitely reacting to their ownship maneuvers. Within seconds, all four aircrew lost visual contact with the object.

As[1843(a)(2)] was reporting what they observed over the radio to their controller (their controller was an Airborne Intercept Controller in an airborne E-2C Hawkeye), the controller reported "You aren't going to believe this... the object is at your CAP." [The CAP was [1843(a)(2)] flight's navigation point to
Page 92 ↗
originate their intercept training.] Apparently, the E-2C was able to track the object with their onboard surveillance radar.

At that time, another two-ship of F/A-18Fs was vectored to investigate the unidentified object since they were now geographically closer than [1843(a)(2)] flight. [1843(a)(2)] was one of the aircrew in the F/A-18Fs that were vectored toward the object. I am not aware whether [1843(a)(2)] flight was being controlled from a shipboard controller or an airborne controller. [REDACTED] [1843(a)(2)] [1843(a)(2)] was able to gain a radar contact of the unidentified object with his APG-73 in search (range is unknown by me or[1843(a)(2)]). According to [REDACTED] [1843(a)(2)] [1843(a)(2)][REDACTED], once [1843(a)(2)] commanded the radar to single target track the object, the radar displayed jamming indications and was unable to maintain track. [Jamming indications observed are above the classification of this document.] However,[1843(a)(2)] was able to gain a track of the object with the Advanced Targeting Forward Looking Infrared (ATFLIR) sensor. As they flew toward the object,[1843(a)(2)] aircraft maintained ATFLIR track of the object for 2-3 minutes and recorded the ATFLIR display. Prior to visually observing the object, the ATFLIR broke track, and the object was not observed by any additional aircraft sensors.

According to [1843(a)(2)] the ships' radars observed the object for several days prior to the visual observation, and continued to observe it randomly over the next few days. [1843(a)(2)] states that he was never officially asked about the incident from anyone other than the people he reported it to on the USS Nimitz. Additionally, he was never told not to discuss the incident.[1843(a)(2)] VFA-41 Executive Officer, believes that Commander, CSG-11,[1843(a)(2)] made phone calls to commands ashore regarding the incident. However, none of us know if there was an official report of the events released by CSG-11, USS Nimitz, or any other commands.

Word of the incident spread through the USS Nimitz rather quickly. When I entered CVIC later that afternoon, I saw several of the intel personnel wearing aluminum foil hats with antenna on the top. Everyone seemed to be enjoying the
Page 93 ↗
story. For the next several days the ship's crew played stereotypical UFO movies on the closed circuit television. The incident was significant enough that I believe everyone in CVIC or in a leadership position in CVW-11 or CSG-11 will remember its occurrence for the rest of their lives.
Page 94 ↗
BAASS Investigation: Lakenheath

RAF Lakenheath F-15C Incident

Executive Summary

On the afternoon of January 12, 2007, amateur radio enthusiasts in England made a recording of airborne U.S. Air Force F-15C aircraft stationed at RAF Base Lakenheath, United Kingdom. The recording is a 4 minutes and 32 second audio clip which captures two USAF F-15Cs that had numerous radar tracks and a few visual sightings of an unidentified object. The radio enthusiasts released their recording to UFO enthusiasts in London. The event was first publicly reported by the "BuryFreePress" on March 27, 2007. Subsequently, three internet reports have been found that discuss the event. The History Channel's television series "UFO Hunters" mentions this event on one of their shows.

A phone conversation with the former Commanding Officer, 493rd Fighter Squadron, and a face-to-face interview with the lead pilot involved in this event confirmed that the recording is authentic and the event did take place. Although the internet news articles reported that London military air traffic control contacted the flight of F-15Cs after a UFO was picked up by military air traffic control radar, this information is incorrect. The F-15Cs were the first to detect the unidentified object via their airborne radar.

Summary of the F-15C pilots' radar and visual contact:

• Two separate F-15Cs tracked the object on radar numerous times.

• The F-15C pilots reported the unidentified object to their military air traffic controller, who also had intermittent radar contact on the unidentified object, but was disinterested.
Page 95 ↗
• Two separate pilots visually acquired the object.

• The object was seen or tracked between 17,000 and 18,000 feet mean sea level, and apparently "not falling." In retrospect, the lead pilot believes the object was traveling with the prevailing winds (west to east) at slow speed (less than 60 knots).

• The object was described as looking like a "rock" and "a very small black object" which "did not look like a bird."

• The object was "softball to watermelon" sized.

• The object was black and "did not appear to be uniform" (smooth or symmetrical) and "may have had a red dot or discoloration."

• The flight made (at least) four passes by the object to try and identify it.

• The squadron or pilots did not officially report the incident to any U.S. or DoD agencies, except their air traffic controller.

• A British UFO enthusiast made a request for information through the UK government. The lead pilot was aware of this, but did not recall if he spoke with anyone about the request for information.

• The lead pilot, in retrospect, believes the object may have been some type of a balloon because it had a velocity closely associated with normal wind speed. During the event, he did not think that the object was a balloon.

The object the pilots observed may have been some type of balloon. Potential for further investigation includes trying to obtain records of weather balloon flights from British sources, and attempts at obtaining information about the request for information to the UK government. Even if information is received from both of these sources and the object
Page 96 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
remains unidentified, it is unlikely that any additional technological information will be acquired regarding the observed object.
Page 90
Page 97 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
RAF Lakenheath F-15C Incident
Primary Points of Contact
• Lead Pilot: 1843(a)(2), 1843(a)(1)(B)
o 1843(a)(2), 1843(a)(1)(B)
• Wingman Pilot: 1843(a)(2), 1843(a)(1)(B)
• Former Commanding Officer, 493rd Fighter Squadron: 1843(a)(2), 1843(a)(1)(B)
1843(a)(2), 1843(a)(1)(B)
o 1843(a)(2), 1843(a)(1)(B)
o
RAF Lakenheath F-15C Incident
Detailed Report of Interview with Lead F-15 Pilot
On April 18, 2009, 1843(a)(2) and 1843(a)(2) of BAASS interviewed 1843(a)(2), 1843(a)(1)(B) regarding the events that transpired on or about the afternoon of January 12, 2007 near RAF Lakenheath, UK.
The following details the events that occurred according to 1843(a)(2), 1843(a)(1)(B)
1843(a)(2), 1843(a)(1)(B) was stationed at RAF Lakenheath, UK and assigned to the 493rd Fighter Squadron in January 2007. [REDACTED]
1843(a)(2), 1843(a)(1)(B) [REDACTED] openly stated that he does not believe in UFOs.
1843(a)(2), 1843(a)(1)(B) believes the sighting event occurred in January or February 2007. [The audio recording of their radio transmissions was reportedly made on the afternoon of January 12, 2007.] 1843(a)(2), 1843(a)(1)(B) was leading a formation of two F-15C aircraft on a routine training flight.
Page 91
Page 98 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
leading a formation of two F-15C aircraft on a routine training flight.
1843(a)(2), 1843(a)(1)(B) wingman (number two aircraft) for this event was [REDACTED]
1843(a)(2), 1843(a)(1)(B) The flight was conducted in the East Anglian MTRA (Military Temporary Reserved Airspace) – over land and just north of RAF Lakenheath. The flight used RAF Lakenheath as their "bullseye" reference point. The flight was monitoring "London Mil" – an air traffic control agency – on their primary radio; and was operating on a discreet frequency assigned by London Mil on their auxiliary ("aux") radio. The F-15Cs had APG-63v1 Suite 4 – a modern, mechanically scanned pulse-doppler radar.
Once the flight arrived in the airspace, 1843(a)(2), 1843(a)(1)(B) separated the two aircraft with him going west and his wingman going east. While they were separating, 1843(a)(2), 1843(a)(1)(B) gained a radar lock of unreported traffic approximately 15 nautical miles in front of him. Because the velocity of the track was very slow (less than 60 knots), he thought it was a spurious lock with no valid target similar to chaff. 1843(a)(2), 1843(a)(1)(B) stated this was not unusual for the radar to falsely display contacts or tracks that are not valid. [REDACTED] executed a bump acquisition (break lock and attempt re-lock) to validate the target. The radar reacquired the track indicating something at 17,700 feet mean sea level (MSL) and low speed. 1843(a)(2), 1843(a)(1)(B) maneuvered his aircraft to fly near and attempt to visually identify the track. 1843(a)(2), 1843(a)(1)(B) flew an intercept profile and visually acquired an object which he estimates he maintained approximately 500 feet of separation with. This is when the recording of the radio transmissions on their auxiliary radio begins (a discreet frequency that only the two aircraft are operating on). 1843(a)(2), 1843(a)(1)(B) stated the object appeared to be a single object with one main body and no discernible attachments. The object's size was between that of a softball and a watermelon. The shape did not appear to be uniform – not necessarily jagged, but the edges did not appear to be smooth or symmetrical. The object was black and may have had a red dot or some reddish discoloration. The object did not appear to be highly reflective. The object looked like a "meteor rock."
Page 92
Page 99 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
1843(a)(2), 1843(a)(1)(B) and his wingman subsequently made at least three additional passes by the object. On two of those passes, 1843(a)(2), 1843(a)(1)(B) was able to visually acquire the object. The wingman visually acquired the object on one pass. The object was tracked on radar by both aircraft multiple times using "auto guns" mode to achieve the lock – a medium pulse repetition frequency (medium PRF) mode. The radar tracks appeared stable, with no real swings of the vector stick and no memory cues. On each visual sighting, 1843(a)(2), 1843(a)(1)(B) believed the object appeared to look like a small black rock that was not falling. The object was always seen and tracked between 17,000 and 18,000 feet MSL. 1843(a)(2), 1843(a)(1)(B) recollection is that the object was moving east-north-easterly at less than 60 knots. [Prevailing winds are typically east-south-easterly in that location with velocities of 15-45 knots, but excursions exist to 100+ knots.] [REDACTED] did not believe the object reacted to their aircraft maneuvers.
1843(a)(2), 1843(a)(1)(B) reported the sighting of the unidentified object to London Mil on their primary radio. This transmission is not on the recording since it is on a different frequency. However, these transmissions were most likely also overheard leading to the media reporting that "F-15s were scrambled to intercept a UFO." 1843(a)(2), 1843(a)(1)(B) stated that the London Mil controller had intermittently observed the object on their radar, but the controller seemed disinterested. No further discussion occurred with the London Mil controller.
1843(a)(2), 1843(a)(1)(B) was recording his cockpit displays and radio transmissions during this flight, but recorded over them using the same tapes on his next mission. No authentic cockpit media exists today.
1843(a)(2), 1843(a)(1)(B) listened to the copy of the recording that is available on the internet. He believes that version has been edited because it does not contain all of the transmissions he believes were made. However, 1843(a)(2), 1843(a)(1)(B) does not recall any transmissions he might have made that are not on the recording. Indicative of probable editing, there does not appear to be time available during the recording when 1843(a)(2), 1843(a)(1)(B) was talking to London Mil on the primary radio.
Page 93
Page 100 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
After the flight returned to base, neither 1843(a)(2), 1843(a)(1)(B) nor his wingman reported the sighting to anyone. A couple of months after the event, the local media reported the intercepted radio transmissions. At which time, 1843(a)(2), 1843(a)(1)(B) reported that they were his radio transmissions to his squadron-mates. The predominant discussion among squadron personnel was of "ridicule" and "teasing" of 1843(a)(2), 1843(a)(1)(B) regarding his UFO sighting. 1843(a)(2), 1843(a)(1)(B) was aware that someone did make an official request for information about the event to the UK government. However, 1843(a)(2), 1843(a)(1)(B) was not sure if he spoke with anyone about this request for information. He believes he might have been interviewed regarding this, but is not sure. He does not know if it was government or military personnel, or UK or US personnel that were handling the request for information.
1843(a)(2), 1843(a)(1)(B) now believes that the object he observed was most likely a weather balloon. His belief is based on his understanding of the size of weather balloons and that the object appeared to be traveling with the wind, and no other logical explanation exists for the sighting.
1843(a)(2), 1843(a)(1)(B) was asked whether he was aware of whether any procedures were in place to report UFO sightings via the military. [REDACTED] replied that he was not aware of any military procedures or processes for reporting UFOs. When he was informed that procedures did exist in the Flight Information Handbook, he was not surprised that he was not aware of the procedures.
Some of 1843(a)(2), 1843(a)(1)(B) current recollection does not appear to correlate with the information transmitted during the recording. However, 1843(a)(2), 1843(a)(1)(B) did appear credible and openly willing to discuss all details
Page 94
Page 101 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
associated with the sighting. Items that are contradictory between his current statements and the radio transmissions recording include:
• The recording indicates that all radar contact by the aircraft was not a radar track – that the object was also picked up in search mode.
• The recording indicates that the radar tracks were not always stable tracks – that the vector stick was sometimes erratic. This is not abnormal or unusual for very slow speed targets (less than 100 knots).
• The recording indicates that the radar did break lock without him commanding bump acquisition. Again, this would not be abnormal for very slow speed targets and does not necessarily indicate any unusual conditions, such as jamming.
• The recording states the radar depicted the object traveling at 80 knots at times, and [REDACTED] recollection was that the object never exceeded 60 knots.
• During the interview, [REDACTED] stated he did not recollect speaking with anyone after the request for information to the UK government. In a previous phone conversation, [REDACTED] stated he was interviewed by someone, but didn't recall who that person was or what agency they worked for.
Page 95
Page 102 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
RAF Lakenheath F-1SC Incident
Investigator's Report of Interview
Date: 17042009
Time (24 Hour): See Remarks
Incident: Sighting by F-15 Pilot near Lakenheath, UK
Location: East Anglia MTRA, United Kingdom
R/P: [REDACTED]
Witnesses:
1. [REDACTED]
Synopsis: While on a routine military training flight in the East Anglia MTRA, in January of 2007 (NFI) [REDACTED] observed an object at approximately 17500 feet. He described the object as black with no discernable shape.
Narrative: On 17 Apr 09 [REDACTED], BAASS Senior Investigator and [REDACTED] BAASS Program Manager, interviewed [REDACTED] provided essentially as follows: In early 2007, Jan or Feb, he was assigned to an F-15 Fighter Squadron at RAF Lakenheath, UK. [REDACTED], along with his wingman [REDACTED] were flying routine intercept exercises in the military training airspace known as East Anglia MTRA. [REDACTED] described the [REDACTED]
Page 96
Page 103 ↗
weather conditions as clear with a West to East jet stream at approximately 60 knots. Along with the intercept training, [REDACTED] was flying an F-15 with three external fuel tanks checking the feed of fuel from the tanks. At one point in the flight the two jets separated from each other. [REDACTED] indicated the Auto Gun radar on his jet signaled a lock on an unknown target; however, the lock was quickly lost. Based on the short duration of the lock [REDACTED] ignored it. As he continued to fly he received a second lock from the Auto Gun radar. At this point he decided to check the area in an effort to identify what may have caused it. [REDACTED] stated he was flying at approximately 17K feet. He then observed an object; he estimated was approximately 500 feet above his jet. He described the object as black in color with definitive shape. [REDACTED] stated there may have been a red mark (NFI) on the object; however, based on his speed he was not sure. He likened the object to that of a "meteor type rock." He estimated the size as between that of a softball and a watermelon. Due to the configuration of his jet, [REDACTED] was only able to slow to a speed of 300 knots. He stated after the initial sighting, and notifying [REDACTED] of the object, he made a series of turns in an effort to further identify it. He related it appeared to be following the jet stream and was traveling at about the wind speed at the altitude. At one point during the sighting [REDACTED] did contact the London Military Air Traffic Radar controllers and advised them he "had a lock" and asked if they had seen it. The response from the controllers was that they had "intermittent hits on an object in your area." [REDACTED] emphasized that this was the only contact with the controllers he can recall during the sighting. [REDACTED] said his wingman, [REDACTED], also got an Auto Guns lock on the object; however, he did not know if [REDACTED] got a visual sighting of the object. [REDACTED] said the F-15 he was flying that day used an APG 63 V1, Suite 4, radar. During the sighting [REDACTED] did not switch modes on his radar, nor did he think of activating the video capability in his helmet. The Heads Up Display tapes of the flight were recorded over on a subsequent mission. [REDACTED] also described the flight path of the object as stable, definitely not erratic. He stated in his opinion the object was likely a weather balloon.
Page 97
Page 104 ↗
[REDACTED] indicated the main reason for tracking and following the object was to ensure it exited the airspace so he and his wingman could continue their training. At no time did he observe the object make any erratic movements or alter its path. During the sighting there was no Electromagnetic Effects, he did not detect any type of jamming of his aircraft systems, and there were no effects on him. [REDACTED] indicated there was no official inquiry into the incident, or any official reporting. [REDACTED] was not aware of any official requirement to report this type of incident within the USAF.
Page 98
Page 105 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
RAF Lakenheath F-15C Incident
Radio Communications Transcript
This 4 minute and 32 seconds recording is widely available on the World Wide Web. This transcript was made from the recording published on a web site titled "Internet Archive." The audio file is a 642 kb Wave file titled "F15sANDUFO(2)", available at the following link:
http://www.archive.org/details/UsafF-15UfoInterceptionOverNorthSea
Statements made in brackets [ ] are not part of the radio transmissions. Information within brackets is intended to give a general interpretation for people not familiar with military aircraft communications. Ellipsis (...) are used to indicate inaudible portions of radio transmissions. [REDACTED] the flight lead is indicated as "Pilot A." The wingman, [REDACTED] is indicated as "Pilot B." The radio transmissions on the recording state:
Pilot A: "... Dude, no kidding, I just flew over on bullseye zero zero eight for twenty. I had a radar hit, and it was swinging, it looked like thirty knots. And there was something there. It looked like a, uh, it didn't look like a bird. It looked like no kidding a rock to me. I, ... negative. I have no idea what it was, but basically, just heads up. Try and stay away from seventeen thousand. Keep your nugget on a swivel, I have no idea what it was. I want to use my radar to see if I can pick this object up again. I picked it up twice. The first time I picked it up my radar broke lock, so I thought it was just, uh, some kind of bad lock, or ... chaff. I'm going to turn back north for a little bit." ["Bullseye 008 for 20" refers to a position from a common airborne reference point called "bullseye." During this flight, RAF Lakenheath's location is used as the bullseye reference point. From the bullseye reference point, the object beared 008 degrees for 20 nautical
Page 106 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

miles. A radar "hit" means a radar contact from a search mode – not a radar track.]

Pilot B: "Two will pick up trail." [Wingman will assume a trail formation position.]

Pilot A: "…, I'm gonna go, uh, start turning back towards the west… I think it was zero zero four for about twenty. I've got it again. Its seventeen seven. Three miles off my nose at, yea, seventeen seven. I'm flying that way now. I'm gonna slow down. I'm not gonna get below three hundred knots, but, uh.

Back towards you, dude I can't tell, something small, very small black object. I had it at seventeen seven. He just flew, it just flew right over me."

["Seventeen seven" means 17,700 feet MSL.]

Pilot B: "Confirm the object appears stationary?"

Pilot A: "Well it, I couldn't tell 'cause it was… small, I think it was moving about thirty knots."

1843(a)(2), 1843(a)(1) (B) ee e Pilot B: [REDACTED] eighty knots." [REDACTED] is the personal callsign of the 1843(a)(2), 1843(a)(1) (B) e lead pilot– Pilot A. Pilot B is reporting the object's speed as 80 knots.]e

Pilot A: "Yea, my radar was showing between thirty and sixty, so I have no idea what it, actually doing.e… it went from seventeen the first time I saw it to seventeen seven, so it's not falling. I don't think it was a bird."

Pilot B: "… radar lock ore.. hits?"

Pilot A: "What was that?"

Pilot B: "Were you taking a manual lock or was it an auto guns lock?"

Page 100
Page 107 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Pilot A: "No I've been getting it with auto guns every time. …bullseye zero zero nine for fifteen. Showing, yea, basically no airspeed on it."

Pilot B: "Two is clean." [Wingman has no radar contact.]

Pilot A: "Say again."

Pilot B: "Two is clean. Two is locked, bullseye zero one two, fifteen, eighteen thousand."

Pilot A: "Alright, I'm going to, uh, climb up slightly here. I want to try and look at it, then you, follow in behind me, if you can."

(Both pilots transmitting at same time – inaudible.)

Pilot A: "Dude, I have no idea what that is. But it just passed over me. I've got it at, uh, seventeen thousand feet, eight miles off my nose, bullseye zero four nine, for twenty, seventeen thousand. I'm gonna get down to sixteen five. It's, uh, two point five miles off my nose right now, seventeen thousand feet. Yea, I'm not going to be able to slow down as much as you are. Maybe you can slow down just a little bit more and get a better look."

(Both pilots transmitting at same time – inaudible.)

Pilot A: "… two hundred and twenty knots, non-maneuvering."

Pilot B: "Copy, confirm you've merged with it?"

Pilot A: "I am about to merge right now, I'm seeing him, …nowọ and I'm gonna get my airspeed back before I maneuver. Are you locked or clean?"

Pilot B: "I'm no joy. Approaching line abreast with you, two thousand feet high, eighteen five."

Page 101
Page 108 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Pilot A: "Copy that, I'm coming in an easy right hand turn. You said you're at eighteen?"

Pilot B: "Yea, I climbed back up to nineteen five now. You're six o'clock for about ten miles."

Pilot A: "Copy that."

Pilot B: "If we are well clear, I will descend at this time. Aux, are we clear? Um, posit?" ["Aux" indicates he is transmitting on the auxiliary radio.]

Pilot A: "I, uh, I'm not sure. Again, it stayed between seventeen and eighteen. So, I believe I'm in the vicinity of it. I'm not, uh, a hundred percent positive. One's blind. I am visual now. I am gonna fly underneath you." ["One's blind" means lead has lost sight of his wingman. "Visual" means he has regained sight of his wingman.]

Pilot B: "Copy. I saw it that time. I could not make out what it was."

Pilot A: "You did see it?"

Pilot B: "Affirm."

Pilot A: "Alright, I'm gonna circle back around. Don't know if we'll be able to see it through the HUD?"

Pilot B: "We have somebody out here with us." [Indicating that other aircraft are now operating in the same airspace.]

Pilot A: "Yea, I see him. Two, did you see anything?"

Pilot B: "Negative."

Page 102
Page 109 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

RAF Lakenheath F-15C Incident

Media Reporting

From: http://www.buryfreepress.co.uk/mildenhall/UFO-mystery-at-RAF-Lakenheath.2145459.jp

UFO mystery at RAF Lakenheath

Published Date: 27 March 2007

Mystery surrounds claims that jets from RAF Lakenheath were called to intercept a UFO.

UFO experts claim to have a recording which they have posted on the internet as proof that London Military Air Traffic Control contacted a flight of US Air Force F-15s from the base, after a UFO was picked up on their radar on January 12.

But air traffic control denies making the call – and RAF Lakenheath will not comment without having more detail over the alleged incident. [1843(a)(2)] features writer for UFO Data Magazine, said: "We are still looking into it and we have made a Freedom of Information request to the Ministry of Defence and have also contacted RAF Lakenheath – but they haven't got back to us yet."

The magazine and UFO Monitors East Kent are analysing an audio file picked up by radio enthusiasts purporting to be a call made by London Military Air Traffic Control to a crew of F-15s flying out of RAF Lakenheath.

They claim it tells the American airmen to intercept an unknown target at 3,000 to 4,000ft.

The F-15s get a radar lock on the target and make a 'pass' at 17,000ft and then again at 17,700ft.

Page 103
Page 110 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Pilots described the black rock like object as unlike any aircraft they have ever seen.

"One pilot was heard to say to another: 'Did you see that?' And the other replied: 'Yes, but I don't want to talk about it," said [1843(a)(2)], of UFO Monitors East Kent.

It is also claimed that the object occasionally appeared to come to a complete halt.

UFO monitors are unable to give a location or a time for the incident, saying only that it happened in the afternoon.
The base itself said it was unable to look into the incident without these details.

A spokesman for London Military Air Traffic Control said: "I've spoken with both the civil and military supervisors at London Control. Neither has any record of an intercept request on or around January 12 – and intercept requests are recorded – so I cannot verify this account."

You can hear the audio file for yourself at www.ufodata.co.uke- click on F-15s UFO incident.

Page 104
Page 111 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

From: http://www.ufocasebook.com/raflakenheath.html

1843(a)(2), 1843(a)(1)(B)

1843(a)(2)

From: http://secret-teachings.blogspot.com/2008/01/raf-lakenheath-ufo.html

Wednesday, January 16, 2008

RAF Lakenheath - UFO

On Friday, January 12th 2007, London Military Air Traffic Control contacted a flight of US Air Force F-15s out of RAF Lakenheath, Suffolk, UK, to intercept an unknown target they had picked up on radar at 3000 to 4000ft altitude.
The F-15s call-sign [REDACTED] went to investigate, and got a solid radar-lock on the unidentified target.
Page 112 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

They made two passes and passed the object, which was at 17,000ft on the first pass and then 17,700ft on the second pass. They described it as black in colour and stated that it was not a bird and unlike any aircraft they had ever seen.

One pilot was heard to say to another: "Did you see that?" And the other replied: "Yes, but I don't want to talk about it."

An audio file is being analysed by UFO Monitors East Kent, and UFO Data Magazine, from the air-to-air communications by the crews of the F-15s. UFO Monitors East Kent, here in Kent, England, along with UFO Data Magazine are making enquiries into the incident and are hoping to make representations under the US and UK Freedom of Information Acts.
This looks like an intriguing case, especially as the incident was recorded by radio monitors here in the UK.

1843(a)(2), features writer for UFO Data Magazine, said: "We are still looking into it and we have made a Freedom of Information request to the Ministry of Defence and have also contacted RAF Lakenheath – but they haven't got back to us yet."

It always good to have the audio but as yet this is officially unconfirmed.

There's as much chance (if not more) of UFO's being terrestrially made rather than coming from another galaxy.

Page 106
Page 113 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

From: http://www.unexplained-mysteries.com/forum/index.php?showtopic=92107

UFO mystery at RAF Lakenheath

Latest Mildenhall news
27th March 2007

Mystery surrounds claims that jets from RAF Lakenheath were called to intercept a UFO.

UFO experts claim to have a recording which they have posted on the internet as proof that London Military Air Traffic Control contacted a flight of US Air Force F-15s from the base, after a UFO was picked up on their radar on January 12.

But air traffic control denies making the call – and RAF Lakenheath will not comment without having more detail over the alleged incident.

1843(a)(2), features writer for UFO Data Magazine, said: "We are still looking into it and we have made a Freedom of Information request to the
Page 114 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

Ministry of Defence and have also contacted RAF Lakenheath– but they haven't got back to us yet."

The magazine and UFO Monitors East Kent are analysing an audio file picked up by radio enthusiasts purporting to be a call made by London Military Air Traffic Control to a crew of F-15s flying out of RAF Lakenheath.

They claim it tells the American airmen to intercept an unknown target at 3,000 to 4,000ft.

The F-15s get a radar lock on the target and make a 'pass' at 17,000ft and then again at 17,700ft.

Pilots described the black rock like object as unlike any aircraft they have ever seen.

"One pilot was heard to say to another: 'Did you see that?' And the other replied: 'Yes, but I don't want to talk about it," said 1843(a)(2), of UFO Monitors East Kent.

It is also claimed that the object occasionally appeared to come to a complete halt.

UFO monitors are unable to give a location or a time for the incident, saying only that it happened in the afternoon.
The base itself said it was unable to look into the incident without these details.

A spokesman for London Military Air Traffic Control said: "I've spoken with both the civil and military supervisors at London Control. Neither has any record of an intercept request on or around January 12 – and intercept requests are recorded – so I cannot verify this account."

Page 108
Page 115 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

SECTION 2B BAASS CONTRACTS AWARDED

MUFON

Two contracts have been awarded to MUFON:

• 081006-1: To prepare four papers each focusing on the following four technical areas: 1. Lift, 2. Propulsion, 3. Control and 4. Human Effects.
• Purchase Agreement Feb 20, 2009. Information purchase on MUFON cases, investigations, eyewitness contact details, data, database information.

DOCUMATICA

Two contracts have been awarded to Documatica:

• 081110-1: To prepare a plan of action that shall describe technical approaches to the classification, codification, and retrieval of civilian and military sightings possibly representing breakthrough technologies along the lines of "Project canella" submitted by [REDACTED] on September 8, 2008 1843(a)(2)
• 090109-1: To deliver 668 case NIDS database with case classifications to BAASS, to spend 8 days at BAASS training BAASS personnel on Project Capella, to deliver the full case summaries of the 1843(a)(2) database, to initiate contact with CNE-GEIPAN with a view to gaining access to their UAP database.

EARTHTECH INTERNATIONAL

Four contracts/purchase agreements have been awarded to Earthtech:

• 080930-1: To provide 12 overview papers on the 12 BAASS technical areas.
• Letter of Engagement with 1843(a)(2). Work on directed projects as specified by BAASS administrator. Effective Jan 5, 2009.
• 090105-1: Purchase Agreement for 24-30 position papers that will be based on the 12 BAASS technical areas.

Page 109
Page 116 ↗
• 090615-1: Purchase Agreement to independently review 10 of the submitted 26 papers pertaining to the BAASS 12 technical areas.

TRANSLATOR CONTRACTS

• 090115-1: Purchase Agreement with [REDACTED] to accurately translate 200 pages of documents and graphs from Portuguese into English.
• 090302-1: Purchase Agreement with [REDACTED] to accurately translate 329 pages of reports from Danish into English.
Page 117 ↗
SECTION 2C: PROGRESS ON NINE COMMITTED BAASS RESEARCH PROJECTS

Introduction

In November 2008, BAASS Management submitted a Project Management Report (PMR) comprising nine overview projects that were focused on and included the scope of the final report (due in September 2009) for the twelve following areas outlined in contracts# HHM402-08-C-0072: (1) Lift, (2) Propulsion, (3) control, (4) Power Generation, (5) Spatial/Temporal Translation, (6) Materials, (7) Configuration/Structure, (8) Signature Reduction (Optical/IR/RF/Acoustic), (9)Human Interface, (10) Human effects, (11) Armament (RF and DEW), and (12) Other areas in support of 1-11.

Short summaries of the nine projects and their roadmaps as originally described in the November 2008 BAASS PMR are as follows.

Project Physics was mandated to study and report on the current state of the art research in North America and elsewhere on all twelve technical areas (see paragraph above). A Purchase Agreement Contract was signed between BAASS and Earthtech whereby Earthtech would solicit 26 scientific leaders from around North America, Europe and elsewhere who constituted world authorities on aspects of the 12 technical areas of interest to BAASS. Earthtech then signed and executed a series of subcontracts with these leading technical experts for the delivery of 26 high quality summary papers that encompassed different technical sub-specialties with the 12 technical areas. The subcontract stipulated that these high quality technical papers would be delivered to BAASS on or before July 31, 2009.
Page 118 ↗
Project Engagement was to locate and secure small geographic areas that experience very frequent displays of advanced aerospace vehicles. The purpose is to directly observe and engage with advanced aerospace vehicles and their pilots. A ranch in Utah was chosen as the primary location for these preliminary studies.

Project Cooperation required the full cooperation between the DIA sponsors and BAASS and lays out the expected frameworks and specifics of this cooperation. This necessitated the help and cooperation from the DIA in assisting BAASS to obtain the high value film, hardware, relevant materials and information that are essential to the successful completion of this project.

Project Campus sought to stimulate, motivate and encourage the senior levels of the academic community in the United States to seriously study advanced aerospace vehicles and their performances. Secondly, the intent of this project was to engage the academic community in seriously studying the political, national defense and sociological consequences of interaction between human societies (and their attendant belief systems) with advanced aerospace technology.

Project Database sought to bring together existing data from multiple separate databases on advanced aerospace vehicle performances in the United States, and ultimately in other countries for the past 60 years into a newly designed data warehouse, located at BAASS headquarters in Las Vegas, Nevada. The intent was that this new data warehouse would be searchable by keywords that address all twelve technical areas.

Project Oral History was to contact and record interviews with dozens of highly placed individuals from industry and the military who have had direct knowledge of film evidence, physical material evidence, hardware itself, biological tissue and other material as they pertain to advanced aerial technology in the United States over the past several decades.

Project Blue Book Materials intended to obtain the case files and associated trace materials with the help of DIA of multiple high value cases
Page 119 ↗
involving advanced aerospace vehicles that were never included in Project Blue Book presumably because they were deemed too sensitive. In addition, the full Project Bluebook archived cases was to be acquired by BAASS.

Project Northern Tier committed to obtaining information and case files pertaining to dozens of cases in which advanced aerospace vehicles flew over restricted air force bases containing nuclear weapons, hovered over weapon storage depots and interfered with functional integrity of ICBM missile systems during the 1960s and 1970s. All of these cases potentially provide evidence of a threat to the national security of the United States.

Project Colares outlined a plan to obtain materials and case files, with help from the DIA, from an extensive series of advanced aerospace incidents, many of which caused death and injury to indigenous inhabitants, occurring on Colares Island in the Northern area of Brazil in 1977. The Brazilian Air Force conducted an investigation and obtained multiple photographs, instrumented detection and eyewitness testimony, much of which pointed to potentially hostile activity by the advanced aerospace vehicles. The intent was also to expand beyond the Colares area and to study the impact of advanced aerospace technologies on the entire country of Brazil.

In the following sections, which constitute the main body of this report, BAASS will report individually on the progress, as of July 23, on each of the nine separate projects briefly summarized above.
Page 120 ↗
2C.1 PROGRESS ON PROJECT PHYSICS

By July 23, 2009 Earthtech International had received 26 papers that were focused on differing subdivisions of the following 12 subject areas (outlined in contract # HHM402-08-C-0072: (1) Lift, (2) Propulsion, (3) control, (4) Power Generation, (5) Spatial/Temporal Translation, (6) Materials, (7) Configuration/Structure, (8) Signature Reduction (Optical/IR/RF/Acoustic), (9)Human Interface, (10) Human effects, (11) Armament (RF and DEW), and (12) Other areas in support of 1-11.

The following are the author's names, affiliated institutions and abstracts from all 26 papers.
Page 121 ↗
This information is proprietary and cannot be disseminated or used
without prior written consent from the Operating Manager of BAASS®

STATE-OF-THE-ART & EVOLUTION OF HIGH ENERGY LASER WEAPONS

1843(a)(2)

Abstract

The laser was invented in 1960, only 49 years ago, and (along with the light emitting diode) has evolved into an essential part of our modern every-day life in ways which could not have been foreseen. On the military side, there have also been incredible advances in laser and beam control technologies although no deployment of any high energy weapons. Many concepts have been developed and pursued, only to be discarded or deferred due to technical immaturity, expected production cost, lack of apparent utility, or logistics concerns.

The most significant technical impediment to deployment may have been the large quantities of expensive and hazardous chemicals that were required by the only available high average power lasers. This is now changing with recent advances in electrically powered lasers (both solid state and FELs). As these devices mature over the next few decades, they will enable practical military weapons at power levels ranging from kilowatts to MWs. This evolution may be somewhat slowed or limited in the United States if there are policy concerns about the use of new types of weapons or about the weaponization of space. As an example, the Department of Defense developed a microwave device, called Active Denial, for crowd control which has been shown to produce temporary pain without any injury. However, DoD was precluded from deploying it due to policy (not legal) concerns. Other countries may not exhibit similar restraint as

Page 115
Page 122 ↗
This information is proprietary and cannot be disseminated or used
without prior written consent from the Operating Manager of BAASS®

evidenced by the open marketing of laser-blinding weapons despite a 1980 Geneva Convention prohibiting their development or use.

Space offers the ideal environment for laser beam propagation; there is no atmosphere to either attenuate or spread the beam. As a result, large distances could be bridged quickly with range being limited by the size of the transmitting telescope and the potential damage mechanisms being limited primarily by the laser's output power. Initial spacecraft laser weapons are conceivable within the next twenty years with the potential for follow-on power and transmitting telescope growth. Transmitting telescope size would be limited by the spacecraft size and competing demands for weight and volume. Laser power could grow into the MW range as solid state and FEL technology matures but the major limitation to a spacecraft's weapon capability may prove to be its ability to generate and store the energy required by the laser as well as its ability to store and dissipate the resultant waste heat.

Page 116
Page 123 ↗
This information is proprietary and cannot be disseminated or used
without prior written consent from the Operating Manager of BAASS®

THE SPACE-COMMUNICATION IMPLICATIONS OF QUANTUM ENTANGLEMENT AND NONLOCALITY

1843(a)(2)

Abstract

We review quantum entanglement and nonlocality and consider the possibility that the phenomenon could be used for sending observer-to-observer signals. Such a demonstration would break several quantum "No-Signal Theorems" in the physics literature. Nonlocal quantum signaling would have far-reaching implications, in that it would be an enabling technology for superluminal and retrocausal signaling. Scenarios that might lead to nonlocal quantum communication are described, and applications to retrocausal signaling and real-time space communication are considered. We also consider briefly the nonlocal communication implications of nonlinear quantum mechanics.

Page 117
Page 124 ↗
This information is proprietary and cannot be disseminated or used
without prior written consent from the Operating Manager of BAASS®

SPACE ACCESS

WHERE WE'VE BEEN

WHERE WE NEED TO GO

1843(a)(2)

When one considers the development of commercial access to space by our budding space-faring civilization, there is a straightforward effort that is propulsion and reliability dominated. The initial focus should be on schedulable, dependable access to and from LEO (low Earth orbit). It is a matter of skill, hardware and operational systems, not necessarily technology. The means to accomplish such a task has been known for years but has lacked a dedicated organized effort. The key requirement is to develop a robust infrastructure, not necessarily a low-cost one. Without an infrastructure commercial exploitation of low Earth orbit and the Moon will not be possible. What is required is operational hardware based on durable, reliable and demonstrated components. To move beyond the Moon within practical time scales, however, is a function of technology development. Therefore, technology discovery and developments are necessary for future space travel beyond the environs of the Earth. Here we address these issues by providing a running account of the historical details associated with the development of the myriad systems proposed and tested to provide access to space.

Page 118
Page 125 ↗
This information is proprietary and cannot be disseminated or used
without prior written consent from the Operating Manager of BAASS®

ANTIGRAVITY FOR AEROSPACE APPLICATIONS IN 2050

1843(a)(2)

Abstract

Antigravity effects can be implemented by the manipulation of spacetime. In this report we review several different theoretical approaches for exploring the possibility of controlling gravity via generating forces that counteract, or otherwise modify, gravity for the purpose of aerospace propulsion. Einstein's

General Theory of Relativity is the theoretical framework guiding this study.

However, other antigravity approaches via the interaction of quantum theory with gravitation are reviewed. We also explore the question of which method or technique is best suited for aerospace applications and evaluate the make or break issues that limit them.

Page 119
Page 126 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

TRAVERSABLE WORMHOLES, STARGATES, AND NEGATIVE ENERGY

BREAKTHROUGH CAPABILITIES & FEATURES IN 2050

1843(a)(2)

Abstract

Implementation of faster-than-light (FTL) interstellar travel via traversable wormholes generally requires the engineering of spacetime into very specialized local geometries. The analysis of these via Einstein's General Theory of Relativity plus the resultant equations of state demonstrates that such geometries require the use of "exotic" matter. It has been claimed that since such matter violates the energy conditions FTL spacetimes are not plausible. However, it has been shown that this is a spurious issue. The identification, magnitude, and production of exotic matter is seen to be a key technical challenge, however. These issues are reviewed and summarized, and an assessment on the present state of their resolution is provided.

Page 120
Page 127 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

TECHNOLOGICAL APPROACHES TO CONTROLLING EXTERNAL DEVICES
IN THE ABSENCE OF LIMB-OPERATED INTERFACES

1843(a)(2)

Abstract

Since the advent of modern interactive control of computers, technologies have been sought to directly connect the biological and the physical to form a seamless entity. While science fiction explores the possibilities of shared consciousness between brains and mainframes, real-life scientists work toward an equally fantastic, but more pedestrian goal of eliminating required electromechanical human-machine interfaces (HMI). Such technologies promise integration of thought and computer-controlled action, without the need for a limb-operated device to translate intent from physiological networks to physical circuits.

In this treatise, underlying neural structure, function, and activity is first briefly reviewed to provide a background of the type of signals, and the scale of temporal changes, that arise from conscious control within the nervous system. A short primer on brain machine interfaces (BMIs) is included at the end of the background material. A survey follows of the state-of-the-art detection and stimulation technologies available utilizing non-invasive and invasive methods, including several studies that exemplify research paths currently being undertaken. Discussion brings together elements of the technology survey, application limitations, timeline for useful commercial deployment, and predicted future research directions. Two technology research paths are highlighted as the most probable to produce functionally useful devices in the near and far term,

Page 121
Page 128 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

where functionally useful is defined as nearly equal or even superior to the control capabilities of current HMIs.

The technology endpoint sought in this treatise is thought-based operation of remote machinery during normal human activities without mechanical device interaction. That is, control of external devices without the need to go to a specified location such as a shielded room, without the need to remain perfectly motionless to reduce signal noise, and without the need for interaction with a normal electro-mechanical device such as an i-Phone or other handheld device with buttons and trackballs. Data transfer rates, described below, as sought to exceed 5-10 bits/sec to be useful for operation of complex devices – this rate range and above are referred to as high-bandwidth BMIs. Response time for a 1 of N selection of commands is targeted at 300 ms or less. These are the operational parameters assumed for final implementation unless some limitation or super-capability is described.

It is concluded that non-invasive electrical monitoring of neural activity primarily reading combined action of muscles and neurons is the most promising commercial technology in the near term. Inherent limitations in the non-invasive electrical approach require future development of different research paths. It is argued, mainly from the elimination of other approaches, that the most probable technology in the long-term involves invasive single-neuron-based direct cortical connections to form a network of high-bandwidth duplex communication pathways. The current most promising technologies for robust construction of such an interface are optical stimulation, gating, and sensory devices, and chip-based electrode arrays that have been encased in ex-vivo engineered neural tissue.

Page 122
Page 129 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

ANOMALOUS ACUTE & SUBACUTE FIELD EFFECTS ON HUMAN
BIOLOGICAL TISSUES

1843(a)(2)

Abstract

This paper is one of a series in the ADVANCED AEROSPACE WEAPON SYSTEM APPLICATIONS PROGRAM. First, it relates, summarizes, and analyzes evidence of unintended injury to human observers. Second, an argument is made that the subsequent work can inform (e.g., reverse engineer), through clinical diagnoses, certain physical characteristics of possible future Advanced Aerospace Systems from unknown provenance that may be a threat to United States interests.

The evidence discussed includes scientific material that has been peer-reviewed, contained in recently declassified government documents, and early emergent clinical medical analyses also underway in companion research studies, supported by the Sponsor and Affiliates.

■ Based on historical cases, humans have been found to have been injured from exposures to anomalous vehicles, especially airborne, and when in relatively close proximity.

■ The primary mechanisms of injury are related to electromagnetic radiation field effects (EMR field effects).

■ The biophysical characteristics of the injuries are well understood.

■ The energy related propulsion systems are not well understood.

Page 123
Page 130 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

■ The potential deployment of systems is thus, important to understand.

■ Sufficient incidents/accidents have been accurately reported, and medical data acquired, as to support a hypothesis that some advanced systems are already deployed, and opaque to full US Intelligence understanding.

■ Amongst the most important pathophysiological effects are:

o Heating and burn injuries

■ Ionizing and non-ionizing

■ Thermally induced

o Neurological effects

■ Cognitive/ Central Nervous System

■ Neuromuscular / Central & Autonomic Nervous Systems

■ Sensory/ Peripheral Nervous System

■ Neuropsychiatric / Neuroendocrine

o Auditory/ Cranial Nerves VII & VIII

■ Communication & disabling effects

■ Noise and central neurocognitive

■ Analysis of Clinical Diagnostic Codes together with environmental conditions observed during anomalous events are clustered in meaningful ways

■ The medical analyses while not requiring the invention of an alternative biophysics, do indicate the use of (to us) unconventional and advanced energy systems.

Page 124
Page 131 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

ON THE ROLE OF SUPERCONDUCTORS IN GRAVITY RESEARCH

1843(a)(2)

Abstract

This essay is an historical survey of the role that superconductors have played in the recent search for laboratory-scale manipulation of gravity. The invention of superconductors and in particular the recent development of high-temperature ceramic superconductors has provided the impetus for pursuing a connection between gravity, electromagnetism and in particular, magnetism and matter in the solid state. The discovery of YBCO ceramics able to superconduct at liquid nitrogen (LN2) temperatures allowed many laboratories around the world to fabricate these superconductors in various experimentally useful sizes and obtain true Meissner repulsion by cooling them using relatively cheap LN2 rather than liquid helium (LHe). For the theoretician, the possibility of considering the superconductor being a macroscopic quantum object as a reality rather than a fantasy suggested several avenues for the development of theories connecting gravity and gravity-like forces to engineerable matter. For the experimentalist, extrapolations from these theories suggested that there might actually be gravitational disturbances in the laboratory which would be amenable to measurement, assuming that all necessary precautions were taken to exclude artifact.

Page 125
Page 132 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

MAVERICK INVENTOR VERSUS CORPORATE INVENTOR: WHERE WILL THE NEXT MAJOR INNOVATIONS ARISE?

1843(a)(2)

Abstract

Technological innovation has been advanced by several sectors of human society and via a diverse set of circumstances. In the early part of the 20th C, the solitary maverick inventor was responsible for the bedrock of most of today's industrial and commercial enterprise. As these enterprises became larger, they could afford research and development departments of their own. These departments were tasked with developing products and processes aimed at increasing the market share of the parent company. Generally speaking, as time went on these types of enterprises became less hotbeds of true innovation, but rather places where improvements to the current technologies were tightly managed. Such management became stultifying for many inventors wishing to produce true innovation and these mavericks shunned the commercial research agencies and went off to carry out their own brand of research.

Another institution where true innovation is fostered is the university. University research as we know it today only started in Europe in the 18th C. The bulk of the discoveries in science leading to technological innovation came from university research laboratories in the 19th and early 20th centuries. Currently there is considerable controversy concerning the degree to which research at universities is free from external influences either from within the university,

Page 126
Page 133 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

the greater scientific community, or public and/or private agencies that fund the research. As university salaries and expenses go up, there is increasing reliance on external funding sources and the majority of these sources wish to exert some influence over the type of research they are underwriting.

It is due to human aggression and human needs that two additional areas of innovation were initiated. As governments became embroiled in conflicts, they found the need to fund "think tanks" for the purposes of stimulating scientific developments which could aid war efforts. As well, the needs of their constituents for food, shelter, health care, energy, economic development, space exploration and so forth demanded the establishment of government-funded agencies whose job was to perform research and produce policy. To be effective, military planners needed access to the most innovative technologies in all areas of endeavor, not just armament, and so established their own research and development departments.

Circumstances determine the temporal requirement for innovation. Modern versions of The Four Apocalyptic Horsemen (wars, pestilence, lies, famine/death: read conflict, environment, economy, health) pretty well sum up the major stimulants that foster innovation. Fortunately, human society has a remarkable propensity for inventing methods of overcoming seemingly insurmountable obstacles, at least so far.

In this essay, we will concentrate on two areas of technological innovation where solutions have been particularly hard to come by, namely energy and propulsion, in particular aerospace and space propulsion. It is now the case that new and exotic materials and their dimensions are driving the quality and quantity of energy and propulsion innovations and preventing the average inventor from contributing new and useful forms and assemblies. The capital outlay required to probe the limits of current high technology in search of a new breakthrough is also beyond the means of the vast majority of lone inventors. These are the major reasons for the shift in focus from the lone maverick

Page 127
Page 134 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

inventor to the "corporate inventor", the latter being a part of a large organization.

This essay will underline the roles of the maverick versus the corporate inventor and provide some insight as to where to expect the required innovations in the areas of energy and propulsion.

Page 128
Page 135 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

METALLIC GLASSES: STATUS AND PROSPECTS FOR AEROSPACE APPLICATIONS

1843(a)(2)

Abstract

Metallic glasses combine some of the advantageous mechanical properties of metals – strength, stiffness, and, in some cases, toughness – with the processing flexibility usually associated with thermoplastic polymers. The absence of crystalline defects allows metallic glasses to be much stronger than conventional alloys, but also means that they have near zero tensile ductility and poor fatigue resistance. In structural applications, therefore, metallic glasses are most likely to be useful in the form of composites consisting of ductile crystalline dendrites in a metallic glass matrix. These dendritic composites sacrifice some strength but can have exceptionally high fracture toughness as well as good

Page 129
Page 136 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
fatigue resistance, and could replace high-strength steels in certain load-limited structural components in aerospace vehicles where space is limited.
Because they are true glasses, thermoplastic forming near the glass transition temperature affords metallic glasses tremendous flexibility in processing. For instance, metallic glass components can be formed in a single step (e.g. by injection molding) in complex geometries that would be difficult or impossible to produce with conventional alloys. In addition, metallic glass foams can be made with relative ease, raising the possibility of making structural foams with high strength and stiffness. Finally, because they lack a crystalline grain structure, metallic glasses can be used to form nanoscale features with high fidelity. This may make metallic glasses useful in a variety of micro-electromechanical systems (MEMS) applications.
Metallic glasses also have significant limitations for aerospace applications, however. Foremost among these is a lack of good glass-forming alloys; in particular, there are no good aluminum-rich glass-forming alloys, the known titanium-based alloys are either relatively dense (due to high concentrations of alloying elements) or contain beryllium, and the known magnesium- and iron-based alloys are all quite brittle, with low fracture toughness. Although metallic glass matrix composites can have outstanding properties (particularly strength and fracture toughness), the number of good composite systems known at present is also quite limited.
Therefore, in order for metallic glasses (and their composites) to be of broad utility in aerospace structural applications, progress in the following areas is required:
1. Development of new lightweight alloys and composite systems, preferably by computational and/or combinatorial approaches rather than trial and error;
2. Understanding of mechanical behavior, especially
a. The effect of alloy composition and structure on plastic deformation
Page 137 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
b. Microstructural design of composites for optimal toughness; and
3. Development of processing techniques, including thermophysical processing of complex and/or nanoscale features as well as production of metallic glass foams.
It is highly likely that continued work over the next 20-50 years will result in significant advances in all of these areas and that metallic glasses and metallic glass matrix composites will see increasing acceptance as structural materials. Whether or not they achieve widespread use in aerospace applications, however, depends critically on the development of new, lightweight alloys.
Page 131
Page 138 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
THEORY AND EXPERIMENTS OF INVISIBILITY CLOAKING
1843(a)(2)
Abstract
The idea of invisibility has fascinated people for millennia, inspiring many myths, novels and films. In 2006, invisibility cloaking has become a subject of science and technology. This study describes the important current theoretical and experimental developments and tries to project into the future.
Page 132
Page 139 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
AN EASY INTRODUCTION TO THE STATISTICAL DRAKE EQUATION
1843(a)(2)
Abstract
In the field of SETI (Search for Extraterrestrial Intelligence) the standard metric for the estimation of the likely number of intelligent civilizations in, say, our galaxy is the classical Drake Equation first proposed by experimental radio astronomer Frank Drake. The Drake equation consists of a product of seven numbers, each an estimate of a key factor such as the number of stars in the galaxy under consideration, the fraction of stars that have planetary systems, the number of planets in a given system that are ecologically suitable for life, the fraction of otherwise suitable planets on which life actually exists, etc. A corollary issue for which the Drake equation finds application is an estimate of the distance to the nearest ET civilization.
Here we provide a statistical generalization of the Drake equation. From a simple product of seven numbers, the Drake equation is now turned into the product of seven random variables. The key advantage of the generalization is that a distribution and an error bar can now be associated with each variable in the classical Drake equation. Statistical analysis then provides estimates for questions of interest (such as mean distance to a signaling civilization) on the basis of such statistical distributions with associated error bars. For the Milky Way galaxy, for example, under reasonable assumptions the statistical approach leads to a mean distance to a signaling civilization of 2670 light years with an error bar of +/- 1309 light years.
Page 133
Page 140 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.
Way galaxy, for example, under reasonable assumptions the statistical approach leads to a mean distance to a signaling civilization of 2670 light years with an error bar of +/- 1309 light years.
Page 134
Page 141 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

THE IEC FOR FUSION POWER AND SPIN-OFF APPLICATIONS

1843(a)(2)

Abstract

This report is intended to provide the reader with an overview of the basics, the current experimental status, supporting theory, and potential applications of Inertial Electrostatic Confinement (IEC) fusion. Emphasis is placed on work in these areas at the University of Illinois (UIUC), although some other materials are brought in.

It is shown that the IEC is a unique approach to fusion in that it offers a number of "spin-"off" applications such as a small neutron source for Neutron Activation Analysis (NAA) on the route to fusion power. Regarding fusion power, it is shown that the IEC is one of the few potential approaches that, due to it characteristic non-Maxwellian plasma dominated by beam-like ions, can potentially burn aneutronic fuels like p-B. That ability, combined with its simple mechanical structure and small size make the IEC reactor, if achieved, an ideal fusion power unit. Present experimental devices are 4-5 orders of magnitude below breakeven energy gain for p-B11. However, it is argued that the ability to study the physics in very small volume plasmas makes it possible to rapidly investigate scale-up to a power producing device. As an example, the report concludes with a conceptual experiment proposed for demonstration of breakeven conditions for p-B11 using a hydrogen plasma simulation.

Page 135
Page 142 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

The author has purposely tried to avoid use of equations in this report to make it readable and stress concepts rather than analysis. However, considerable analysis is provided in various of the references so readers interested in that should consult original articles.1

Page 136
Page 143 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

ADVANCED SPACE PROPULSION BASED ON VACUUM (SPACETIME METRIC) ENGINEERING

1843(a)(2)

Abstract

A theme that has come to the fore in advanced planning for long-range space exploration in the future is the concept that empty space itself (the quantum vacuum, or spacetime metric) might be engineered so as to provide energy/thrust for future space vehicles. Although far-reaching, such a proposal is solidly grounded in modern physical theory, and therefore the possibility that matter/vacuum interactions might be engineered for space-flight applications is not a priori ruled out. Given the current development of mainstream theoretical physics on such topics as warp drives, traversable wormholes and time machines that provides for such vacuum engineering possibilities, we provide here from a broad perspective the physics and correlates/consequences of the engineering of the spacetime metric.

Page 137
Page 144 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

METAMATERIALS FOR AEROSPACE APPLICATIONS → ENERGY HARVESTING, SUB-WAVELENGTH IMAGING, OPTICAL DEVICE MINIATURIZATION, AND NON-RECIPROCAL OPTICAL DEVICES

1843(a)(2)

Abstract

While it is difficult to pinpoint the exact applications that metamaterials will find in advanced aerospace industry, metamaterials possess several features that unique suite them for aerospace applications. First, they enable miniaturization of a variety of optical components. Making space-born device small and light-weight is essential. These opportunities have been covered in Section 3. Second, metamaterials enable new modalities for sub-diffraction imaging: super-lenses, hyperlenses, and far-field superlenses. Those modalities dispense with the near-field scanning microscopes: complex, slow-scanning, large devices that are not appropriate for advanced aerospace platforms. These applications are described in Section 2. Harvesting infrared photons, whether from coherent laser sources on Earth (for guidance, energy recharging, etc.), from thermal Earth glow, or from the stars, is likely to be important for aerospace platforms. Metamaterials offer unique opportunities for making efficient wavelength-tunable wide-angle absorbers as described in Section 4. As you will find from numerous examples in

Page 138
Page 145 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

this Report, metamaterials are going to revolutionize the way light is captured, manipulated, and used for imaging. Although metamaterials are still an academic area of research, these examples illustrate that there is great potential for their practical applications.

Page 139
Page 146 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

POSITRON AEROSPACE PROPULSION

1843(a)(2)

Abstract

Antimatter is considered an extremely attractive fuel for aerospace propulsion because of its enormous advantage in energy density over all other known sources of energy. Yet, due to the fact that antimatter does not occur naturally and is unstable in the presence of matter, no vehicles have ever flown. We present a detailed analysis of turbojets and turbo-ramjet missiles, as well as rockets for manned interplanetary missions. New methods of producing and storing large numbers of anti-electrons, or positrons, are discussed, including costs with comparison to antiprotons. Finally, we consider the prospects for the first, modest demonstration of positron propulsive flight in the foreseeable future.

Page 140
Page 147 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

BIOMATERIALS: A SURVEY OF THE PRESENT FIELD

1843(a)(2)

Abstract

The performance of biomaterials underlies the success of many medical devices that must be acceptable to body tissues. These materials often serve critical, perhaps life-and-death functions and so require large amounts of money and time to rigorously test. This seems to be the reason the biomedical industry is slow to produce and accept new materials.

Thus existing materials for implants are generally based on materials that have been available for more than 20 years. Biodegradable materials, particularly the polylactide and glycolide, have a long history of safe and effective use. Building on this solid foundation, most of the innovation is occurring in devising new ways to embody the materials and apply them to new applications. Thus the markets are expanding for biomaterials, and physicians can look forward to new products that will help speed patient recovery.

Page 141
Page 148 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

BIOSENSORS AND BIOMEMS: A SURVEY OF THE PRESENT FIELD

1843(a)(2)

Abstract

MEMs are characterized by small dimensions, enabling new applications of physical principles to make sensors and actuators of superior characteristics.

Physical properties like surface tension and electrostatic charge dominate the operation of the devices, and new fabrication approaches are required to make them. The economic driving forces for this miniaturization are strong for health care and biology.

Advanced fabrication processes are still being discovered to further miniaturize electromechanical systems and to bring us into the realm of nanomechanical systems (NEMS). The new class of NEMS devices are expected to provide a higher performance in applications such as sensors, medical diagnostics and in the electronics industry. Some devices will enable experiments on the structure and function of individual biomolecules.

This field is expanding rapidly. Searches of the scientific literature show new ideas being developed in a number of laboratories throughout the world.

Page 142
Page 149 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

METALLIC SPINTRONICS

1843(a)(2)

Abstract

The semiconductor industry has distinguished itself by a long-term trend known as Moore's law [97] that foresees an exponential increase in transistor density on a chip, doubling approximately every two years. Continuing at this pace the transistor density will reach ~ 10^13 cm^-2 by 2035, that at clock speeds of ~10 GHz would result in ~40 MW/cm^2 of power dissipated on a chip. Unless the energy dissipation from transistor switching can be reduced dramatically, the thermal load associated with 40 MW/cm^2 will exceed that in a rocket nozzle. The failure of thermal management on a chip might end the continued progress of semiconductor industry well before 2035. The International Technology Roadmap for Semiconductors (http://www.itrs.net) has termed this imminent collapse the "Red Brick Wall" where "Red" indicates that there are no "known manufacturable solutions" (of reasonable confidence) for continued scaling in some aspect of the semiconductor technology.

The above scenario motivates the search for signal-processing devices that dissipate very little energy when they switch. The emerging spintronic technology might offer such devices where information is carried by spin, in contrast to CMOS transistors where it is carried by charge, since spin has an inherent advantage over charge when it comes to energy dissipation. Therefore if a

Page 143
Page 150 ↗
This information is proprietary and cannot be disseminated or used without prior written consent from the Operating Manager of BAASS®.

reliable way can be found to control and manipulate spins, spintronic devices could offer higher data processing speeds, lower electric consumption, and many other advantages over conventional chips including, perhaps, the ability to carry out radically new quantum computations.

A spintronic device calls for efficient methods to generate, conduct, process, and detect spin-encoded signals. We have reviewed the physics and emerging applications of two principal spintronic phenomena - Giant magnetoresistance (GMR) and Spin-Transfer-Torque (STT) which provide means to detect (GMR) and manipulate (STT) the spin signals. GMR has already spawned major technological change in the information storage industry with the usage of GMR sensors and read heads and, along with Tunneling Magnetoresistance (TMR), is expected to continue its domination in the detection of spin-encoded signals. STT is a more recent development in spintronics, which provide an efficient means to control and manipulate spin distributions on the nanometer length scale as well as the picosecond time scale, thus positioning STT as the method of choice for fast processing of spin signals in nano-devices.

What is the future of spintronic applications? A number of new spintronic devices based on GMR and STT have been proposed. These include high-frequency (GHz) oscillators, sources, and detectors, and magnetic field sensors, e.g., in non-volatile memories like Racetrack and STT Magnetic Random Access Memory (STT-MRAM). In the foreseeable future, a great deal of fundamental work remains to be done before we see commercial applications of these devices. For memory industry, development of these spintronic applications may lead to a universal memory which would combine cost benefits of DRAM, speed of SRAM, and non-volatility of Flash RAM. Potentially all logic operations on a chip can be carried out by manipulating spins in metallic systems instead of manipulating charges in semiconductor transistors, as in conventional microchips, and, moreover, could be combined on-chip with a universal memory. This would result in a new scalable and radiation resistant electronics, computers, etc. The resistance to radiation would be of particular interest for aerospace applications, because the radiation in space is known to severely damage conventional

Page 144

Pages 151–538 are in the open dataset and in the original.

Get the next PURSUE release in your inbox

We check war.gov every day. When a new PURSUE release drops, you get an email within a day: what's in it, in plain English, with links to the files. Plus a short Friday digest of the week's top UAP stories.

By subscribing you agree to our Privacy Policy. Unsubscribe any time.